The GSAS LPC 2929 board is built around the NXP LPC 2929, an ARM9 processor-based device, allowing you to create and test working programs for this advanced architecture. This board has a wide range of interfaces making it a great starting point for your next ARM project.

LPC-2929

This board hosts the LPC2929 microcontroller from NXP with an embedded ARM968E-S processor core and JTAG interface. In addition the driver chips for the external communication interfaces are included. All microcontroller IO port pins are accessible via connectors. The device drivers can be disabled via jumpers to have control of the micro-controller I/O pins.
The board is powered by a USB port. A serial connection is provided for In-System-Programming (RS-232). There is a provision for CAN and USB interfaces enabling industrial automation as well as automotive applications.
The board has 8 LEDs, analog input (via potentiometer) and three switches as GPIO. The on-board JTAG connector is provided for connecting JTAG based debuggers like KEIL ULINK, SEGGER J-LINK, etc.,
This board, with a power supply connector and 26 pin FRC connector can be interfaced with interface modules such as Seven Segment Display, Elevator, Traffic Lights, Dual DAC, Txdr ADC etc… which are developed by GSASMSPL.
With it’s extensive features and capabilities it is a board that can accelerate your development with ARM based products. This board also serves as an excellent educational tool for training of next generation embedded engineers at educational establishments.

[Specifications]

  • MCU :NXP LPC 2929
  • MCU clock :125 Mhz
  • On-chip RAM :56KB
  • On-chip Flash :768KB
  • Serial Ports :1(On-chip)
  • CAN Ports :2(On-chip)
  • USB Interface :1(On-chip)
  • PCB Size :170 X 202 mm
  • JTAG Interface :20 Pin standard IDC connector
  • Power connector :Standard USB Type -B connector

[Supplied in the Box]

  • LPC 2929 Evaluation board
  • USB Cable
  • Driver software CD
  • User manual

(Optional)

  • Debugger
  • GSAS PS M2 5V@3A; ±12V @250mA;+30V@100mA (Required for some of the interface modules)

[PC Requirements]

  • Standard Pentium PC with USB port
  • CD ROM Drive
  • Windows 2000/XP/Vista OS
  • 300MB of Hard disk space
  • 512MB of RAM

These are the minimum PC requirements.