EE Tools

TOPMAX III

Overview

EXPERT UNIVERSAL DEVICE PROGRAMMER

TopMax-III is a high-speed universal device programmer for USB 1.1/2.0/3.0 PC-interface. It programs a 64Mbit (AM29LV641) flash memory in 42 seconds. This is a true low-cost production-oriented system. The TopMax-III meets the demands of today’s programming solution for lab and production online applications. TopMax-III is a software-driven device programmer that supports a wide variety of programmable devices including EPROM, EEPROM, Serial PROM, EPLD, PEEL, GAL, FPGA, and single chip Microcontroller. The great advantage of this programmer is its programming speed and superior software. It’s controlled via a host IBM PC or compatible computer. The operating software has a user-friendly interface that includes window pull-down menus and virtual memory management to deal with very large files.

  • Concurrent Universal Device Programmer
  • Extremely fast SPI, QPI Serial memory support
  • MX25L12835FM(SPI), P:41.8 V:6.2
  • MX25L12835FM(QPI), P:37.6 V:2.1
  • Auto Search Device Select function supports E(E)PROMs & Microcontrollers
  • Device Insertion Test identifies improperly inserted device before programming
  • Gang Program Mode allows programming up to 8 sockets concurrently
  • (START ALL Key enables to program the programmers simultaneously)
  • Checks for incorrect device insertion, backward, incorrect position, and poor pin contact.
  • Device Operations: Read,Biank check, Program, Verify, Checksum, Data compare, Security, Auto(blank checkprogram- verify),
  • Option Bit program
  • Displays programming parameters and optional bit information on the screen
  • Sets device/buffer address ranges before programming devices
  • User-changeable programming parameters
  • Built-in editor for both buffer date and test vectors
  • Supports Binary and all hex files (POF and JEDEC, Intel Hex, Motorola S Records, Tekhex , straight hex, hex-space,
  • Extended Tekhex, and others, automatic file type recognition) with Load,Edit, and Save commands

DEVICES PROGRAMMED

  • M25Pxx, MX25Lxx, S25LFxx, SST25VFxxx
  • NAND Flash Memory Samsung K9Kxxx, K5Axxx, K5Fxxx, M-System MDOC-256 / 512 / 1G / 2G      Toshiba TC58xxx St-Micro NAND01G / 02G / 04G
  • 28Fxxx, 29Fxxx, 38Fxxx, 29LVxxx, 26LVxxx, 29GLxxx, 29ALxxx, 29Wxxx, 36xxx, 32HFxxx, 34VFxxx, 37VFxxx, 39SFxxx,      39VFxxx, 45LFxxx, 49LFxxx, 50FWxxx
  • 27xxx and 27Cxxx series, from 16 Kbit to 32Mbit with 8-bit/16-bit
  • 256 Kbit to 32 Mbit 28Fxxx, 29Fxxx, 29Cxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series (1.5, 1.8, 2.7, 3.3, 5.0, or 12 Volt)
  • 24Cxx, 24Fxx, 25Cxx, 59Cxx, EPC1/1213/1648, and 93Cxx
  • 27Sxx, 7Cxxx, 71xx, 74Sxx, 87Sxx, 82Sxx,
  • ispLSI(10/20)xx, ispGAL22V10, ispGDS1(2)x, LC40(41)xx M4Axxx series
  • PEELs 153, 173, 253, 273, 18CV8, 20CG10 series
  • EPLDs PLCxxx, PLSxxx, PLUSxxx, Epxxx, EPCxxx, EPMxxx, PLDxxx, 5Cxxx, 85Cxxx series
  • TSOP, BGA, QFP, TSOP2, FBGA, TQFP, CSP, uBGA, PLCC, SOIC, EBGA, PoP, SSOP, TFBGA and more
  • One on-board FPGAs for extremely fast communication.
  • Supports real low-voltage such as 5, 3.3, 2.7, 1.8 volts for programming power
  • Detects all pin locations for poor or damaged pin contacts
  • External START Key allows production programming mode
  • Internal universal power supply,110-240 VAC (no separate power supply required in foreign country)
  • Current limiting protects hardware circuit from improperly inserted or defective chips and operation errors
  • Standard 48-pin ZIF(Zero Insertion Force) socket accepts both 300mil and 600 mil DIP devices
  • True universal pin driver hardware
  • Hardware diagnostic program exams all socket-pin drivers before using programmer

SYSTEM REQUIREMENT

  • A hard disk drive (4 Megabytes) is recommended for software installation / set up
  • PC RAM size: 512K of conventional memory
  • OS: WINDOWS 7, 8 or 10

ELECTRICAL REQUIREMENTS

Operation Voltage : 90~264VAC , Frequency Range : 47~63Hz , Power Consumption : 100W

STANDARD ACCESSORIES

  • Power Cord
  • USB Cable
  • Software CD
  • User’s Guide

SAFETY STANDARDS

  • CE compliant

WARRANTY

  • One year hardware warranty service in the factory

DIMENSIONS

  • TopMax III : 5.5″(L) x 8.14″(W) x 1.63″(H) ,(140mm(L) x 207mm(W) x 41.45mm(H)

PROMAX II 4G

OVERVIEW

CONCURRENT UNIVERSAL PROGRAMMER FOR PC LOW-COST, HIGH-PERFORMANCE 4-GANG PROGRAMMER

ProMax II 4G is the most innovative and cost-effective 4-gang programming solution on the market. ProMax II 4G supports a wide variety of programmable devices. Its state-of-the-art technology and high-speed programming algorithms optimize programming reliability and output.

  • Concurrent Universal Device Programmer
  • Extremely fast SPI, QPI Serial memory support
  • MX25L12835FM(SPI), P:41.8 V:6.2
  • MX25L12835FM(QPI), P:37.6 V:2.1
  • Auto Search Device Select function supports E(E)PROMs & Microcontrollers
  • Device Insertion Test identifies improperly inserted device before programming
  • Gang Program Mode allows programming up to 4 sockets concurrently
  • (START ALL Key enables to program the programmers simultaneously)
  • Sets device/buffer address ranges before programming devices
  • Device Operations: Read, Blank check, Program, Verify, Checksum, Data Compare, Security,
  • Auto(blank check-program-verify), Option Bit program
  • User-changeable programming parameters
  • Built-in editor for both buffer date and test vectors
  • Supports Binary and all hex files (POF and JEDEC, Intel Hex, Tekhex, Motorola S Records, straight hex,
  • hex-space, Extended Tekhex, and others, automatic file type recognition) with Load, Edit, and Save commands
  • Start Key bu??on function allows ProMax II 4G to operate in mass-production mode(E->B->P->V with one cycle operation)

SYSTEM REQUIREMENT

  • A hard disk drive (4 Megabytes) is recommended for software installation / set up
  • PC RAM size: 512K of conventional memory
  • OS: WINDOWS 7,8 or 10

STANDARD ACCESSORIES

  • Power Cord
  • USB Cable
  • Software CD
  • User’s Guide

SAFETY STANDARD

  • CE compliant

ELECTRICAL REQUIREMENTS

  • Operation Voltage : 90~264VAC
  • Frequency Range : 47~63Hz
  • Power Consumption : 100W

WARRANTY

  • One year hardware warranty service in the factory

DIMENSION

  • ProMax II 4G : 15.16″(L) x 10.08″(W) x 2.25″(H) ,(385mm(L) x 256mm(W) x 57.24mm(H)

  • One on-board FPGAs for extremely fast communication.
  • Supports real low-voltage such as 5, 3.3, 2.7, 1.8 volts for programming power
  • Detects all pin locations for poor or damaged pin contacts
  • External START Key allows production programming mode
  • Internal universal power supply,110-240 VAC (no separate power supply required in foreign country)
  • Current limiting protects hardware circuit from improperly inserted or defective chips and operation errors
  • Standard 48-pin ZIF(Zero Insertion Force) socket accepts both 300mil and 600 mil DIP devices
  • True universal pin driver hardware
  • Hardware diagnostic program exams all socket-pin drivers before using programmer

TOPMAX II

OVERVIEW

TopMaxII is a high-speed universal device programmer for USB 1.1/2.0/3.0 PC-interface. It programs a 64Mbit (AM29LV641) flash memory in 42 seconds. This is a true low-price production-oriented system. The TopMaxII meets the demands of today’s programming solution for lab and production line applications.

  • High-speed Universal Programmer
  • Support USB 1.1 / 2.0 / 3.0 Port in PC
  • Single Socket
  • Auto search device select function supports E(E)PROMs & Microcontrollers.
  • Device insertion test identifies improperly inserted device before programming.
  • Gang Program Mode allows programmers up to 8 units as a concurrent programming system. (External START key allows TopMaxll to operate in stand-alone mode)
  • Check for incorrect device insertion, backward, incorrect position, and poor pin contact.
  • Device Operations: Read, Blank check, Program, Verify, Checksum, Data compare, Security, Auto(blank check program- verify), Option Bit program.
  • Display programming parameters and optional bit information on the screen.
  • Set device/buffer address ranges before programming devices.
  • Extensive on-line F1 help system provides text and graphics.
  • User-changeable programming parameters.
  • Built-in editor for both buffer date and test vectors.
  • Support Binary and all hex files (POF and JEDEC, Intel Hex, Motorola S Records, Tekhex, straight hex, hex-space, Extended Tekhex, and others, automatic file type recognition) with Load, Edit, and Save commands.
  • M25Pxx, MX25Lxx, S25LFxx, SST25VFxxx
  • NAND Flash Memory Samsung K9Kxxx, K5Axxx, K5Fxxx, M-System MDOC-256 / 512 / 1G / 2G Toshiba TC58xxx St-Micro NAND01G / 02G / 04G
  • 28Fxxx, 29Fxxx, 38Fxxx, 29LVxxx, 26LVxxx, 29GLxxx, 29ALxxx, 29Wxxx, 36xxx, 32HFxxx, 34VFxxx, 37VFxxx, 39SFxxx, 39VFxxx, 45LFxxx, 49LFxxx, 50FWxxx
  • 27xxx and 27Cxxx series, from 16 Kbit to 32Mbit with 8-bit/16-bit
  • EEPROM 27Exxx, 28xxx , and 28Cxxx series
  • 256 Kbit to 32 Mbit 28Fxxx, 29Fxxx, 29Cxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series (1.5, 1.8, 2.7, 3.3, 5.0, or 12 Volt)
  • 24Cxx, 24Fxx, 25Cxx, 59Cxx, EPC1/1213/1648, and 93Cxx
  • 27Sxx, 7Cxxx, 71xx, 74Sxx, 87Sxx, 82Sxx,
  • ispLSI(10/20)xx, ispGAL22V10, ispGDS1(2)x, LC40(41)xx M4Axxx series
  • PALs, PALCEs, GALs 16V8, 20V8, 22V10, 20RA10, 26V12 series
  • DS12xx, DS13xx, DS15xx, DS16xx series
  • PEELs 153, 173, 253, 273, 18CV8, 20CG10 series
  • EPLDs PLCxxx, PLSxxx, PLUSxxx, Epxxx, EPCxxx, EPMxxx, PLDxxx, 5Cxxx, 85Cxxx series
  • ATF16/20/22Vxx, ATV750/1500/2500
  • MACH1xx/2xx/4xx, and xxx-SP series
  • MAX5000, MAX7000 series
  • 8741, 8742, 8748, 8749 series
  • 87C51/52, -FA, -FB, -FC, ‘528, ‘652, ‘654, ’54, 89Cxx, 89Sxx, 89LVxx, 89Cxxxx, DCF85xx, 85(87/89)LPCxxx, PXAxx series 87C751/752
  • ST62xx, ST7xx, ST9xx, ST10xx series
  • XC17Sxxx, 17Vxxx, 72xx, 73xx, XCF01 / 02 / 04 series
  • PIC12Cxxx, PIC16xxx, 17xxx, 18xxx series
  • MC68705, MC68HC705, MC68HC711, MC68HC908, MC9S08
  • Z86Cxx, Z86Exx series
  • TTL type : 54, 74(S, LS, L, H, HC) series
  • CMOS type : 40, 45 series
  • Dynamic Memory : 4164 – 1MBit
  • Static Memory : 6116 – 6256
  • User definable test pattern generation
  • One onboard FPGA for extremely fast communication.
  • Supports real low-voltage support: 5, 3.3, 2.7, 1.8, 1.5 volts for programming power.
  • Detects all pin locations for poor or damaged pin contacts.
  • External START key allows production programming mode.
  • Internal universal power supply, 110-240 VAC (no separate power supply required in a foreign country).
  • Current limiting protects hardware circuit from improperly inserted or defective chips and operation errors.
  • Standard 48-pin ZIF(Zero Insertion Foroe) socket accepts both 300mil and 600 mil DIP devices.
  • True universal pin driver hardware.
  • Support a high-speed USB2.0 port for PC interface.
  • Support a standard IEEE-1149.1 (JTAG) port
  • Hardware diagnostic program exams all socket-pin drivers before using programmer

TECHNICAL SPECIFICATIONS

  • Module: 11.0″ (L) x 7.25″ (W) x 2.5″ (H)
  • Weight: 3.25 lbs
  • Socket: Textool 48 pin ZIF standard.

SYSTEM REQUIREMENT

  • TYPE: 386, 486, Pentium or compatibles. PS/2, Portable(notebook) computer.
  • A hard disk drive (4 Megabytes) is recommended for software installation / set up.
  • PC RAM size: 512K of conventional memory
  • I/O PORT: USB 1.1/2.0/3.0 port
  • OS: WINDOWS 95 / 98 / 2000 / NT / XP / 7 / 8 or greater

STANDARD ACCESSORIES

  • Power Cord
  • USB Cable
  • Software CD
  • User’s Guide

SAFETY STANDARDS

  • CE compliant

WARRANTY

  • One year hardware warranty service in the factory

CHIPMAX2

OVERVIEW

UNIVERSAL DEVICE PROGRAMMER FOR PC/USB

ChipMax2 is a low cost and high-performance universal device programmer for PC USB 2.0/3.0 interface. It programs a 64 Mbit flash memory in 42 seconds. ChipMax2 supports over 13000 programmable devices with low voltage (1.8 V). ChipMax2 is the state-of-art universal programmer offers you the most advanced programming facilities with the most user-friendly interface.

  • Universal Programmer with 48-pin Textool Socket
  • Supports Over 13,000 Programmable Devices
  • B/P/V Takes 85 Sec. For 8 of 64 Mbit Flash Memory
  • Supports full WINDOW 95/98/2000/NT/XP/7/8 and greater.
  • Auto search device select function supports E(E)PROMs & Microcontrollers.
  • Device insertion test identifies improperly inserted device before programming.
  • Check for incorrect device insertion, backward, incorrect position, and poor pin contact.
  • High-speed device function tests and user creatable test library.
  • Device Operations: Read, Blank check, Program, Verify, Checksum, Data compare, Security, Auto(blank check-program-verify), Option Bit program.
  • Display programming parameters and optional bit information on the screen.
  • Set device/buffer address ranges before programming devices.
  • Extensive on-line F1 help system provides text and graphics.
  • User-changeable programming parameters.
  • Built-in editor for both buffer date and test vectors.
  • Support Binary and all hex files (POF and JEDEC, Intel Hex, Motorola S Records, Tekhex, straight hex, hex-space, Extended Tekhex, and others; automatic file type recognition) with Load, Edit, and Save commands.
  • Distribution of 16- and 32- bit data into 8-bit portions.
Device P/N Read Blank Prog Verify Erase
AM29F032B 4.70 4.80 56.24 4.73 38.16
AM29LV128ML 6.70 6.65 03:26.00 6.65
AM29LV256MH 17.41 16.00 04:06.16 16.77
AM29LV641DH 4.20 4.43 42.02 4.44
AM29LV641DH
(TopMax)
01:40.00 01:38.00 04:48.54 01:42.00
E28F128J3A 9.93 7.49 1:55 7.75 01:43.30
E28F128J3C 9.93 7.49 02:01.80 7.75 30.31
E28F640J3C 4.27 4.09 70.02 4.19 17.5
K8D3216UTC-T 2.47 2.47 22.17 2.51
MX26L004BQC 0.81 0.81 28.24 0.81 31.87
MX29LV641MH 4.86 01:10.40 4.83
RD38F2040 3.09 3.09 18.71 3.09 53.47
RD38F4050 18.81 18.08 02:55.4 18.30 04:41.8

* Programming Speed With 100% Data in Memory , Times in sec.

  • SYSTEM REQUIREMENT
    • TYPE: 386, 486, Pentium or compatibles. PS/2, Portable(notebook) computer.
    • A hard disk drive (4 Megabytes) is recommended for software installation / set up.
    • PC RAM size: 512K of conventional memory
    • I/O PORT: USB 1.1/2.0/3.0 port
    • OS: WINDOWS 95 / 98 / 2000 / NT / XP or greater

    STANDARD ACCESSORIES

    • AC/DC Adapter(100 to 240 VAC)
    • USB Cable
    • Software CD and User’s Guide

    SAFETY STANDARD

    • CE compliant

    DIMENSION

      • 1 circuit board with heavy duty case
      • Module : 9.5″(L) x 7.0″(W) x 1.5″(H)
      • Weight: 1.75 lbs
      • Built-in Socket: Textool 48 pin ZIF

  • One on-board FPGA for extremely fast communication.
  • Supports real low-voltage support: 5, 3.3, 2.7 and 1.8 volt for programming power.
  • Detects all pin locations for poor or damaged pin contacts.
  • External START key allows production programming mode.
  • Internal universal power supply,110-240 VAC (no separate power supply required in foreign country).
  • Current limiting protects hardware circuit from improperly inserted or defective chips and operation errors.
  • Standard 48-pin ZIF(Zero Insertion Force) socket accepts both 300mil and 600 mil DIP devices.
  • True universal pin driver hardware.
  • Support a high-speed USB 2.0/3.0 port for PC interface.
  • Hardware diagnostic program exams all socket-pin drivers before using programmer.
  • Gang Program Mode allows programmers up to 8 units as concurrent programming system. (START ALL key enable to program the programmers simultaneously)
  • M25Pxx, MX25Lxx, S25LFxx, SST25VFxxx
  • NAND Flash Memory Samsung K9Kxxx, K5Axxx, K5Fxxx, M-System MDOC-256 / 512 G Toshiba TC58xxx St-Micro NAND01G
  • 28Fxxx, 29Fxxx, 38Fxxx, 29LVxxx, 26LVxxx, 29GLxxx, 29ALxxx, 29Wxxx, 36xxx, 32HFxxx, 34VFxxx, 37VFxxx, 39SFxxx, 39VFxxx, 45LFxxx, 49LFxxx, 50FWxxx
  • 27xxx and 27Cxxx series, from 16 Kbit to 32Mbit with 8-bit/16-bit
  • EEPROM 27Exxx, 28xxx , and 28Cxxx series
  • 256 Kbit to 32 Mbit 28Fxxx, 29Fxxx, 29Cxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series (1.8, 2.7, 3.3, 5.0, or 12 Volt)
  • 24Cxx, 24Fxx, 25Cxx, 59Cxx, EPC1/1213/1648, and 93Cxx
  • ispLSI(10/20)xx, ispGAL22V10, ispGDS1(2)x, LC40(41)xx M4Axxx series
  • PALCEs, GALs : 16V8, 20V8, 22V10, 20RA10, 26V12 series
  • DS12xx, DS13xx, DS15xx, DS16xx series
  • PEELs 153, 173, 253, 273, 18CV8, 20CG10 series
  • EPLDs PLCxxx, PLUSxxx, Epxxx, EPCxxx, EPMxxx, PLDxxx, 5Cxxx, 85Cxxx series
  • ATF16/20/22Vxx, ATV750/1500/2500
  • MACH1xx/2xx/4xx, and xxx-SP series
  • MAX5000, MAX7000 series
  • 8741, 8742, 8748, 8749 series
  • 87C51/52, -FA, -FB, -FC, ‘528, ‘652, ‘654, ’54, 89Cxx, 89Sxx, 89LVxx, 89Cxxxx, DCF85xx, 85(87/89)LPCxxx, PXAxx series 87C751/752
  • ST62xx, ST7xx, ST9xx, ST10xx series
  • XC17Sxxx, 17Vxxx, 72xx, 73xx, XCF01 / 02 / 04 series
  • PIC12Cxxx, PIC16xxx, 17xxx, 18xxx series
  • MC68705, MC68HC705, MC68HC711, MC68HC908, MC9S08
  • Z86Cxx, Z86Exx series
  • TTL type: 54, 74(S, LS, L, H, HC) series
  • CMOS type : 40, 45 series
  • Dynamic Memory: 4164 – 1MBit
  • Static Memory: 6116 – 6256
  • User definable test pattern generation

Contact Us

Bengaluru (Headquarters)

Chennai

tn@gsasmspl.com

+91 98450 19071

Delhi

delhi@gsasmspl.com

+91 98450 55228

Hyderabad

ts@gsasmspl.com

+91 98450 19029

+91 98450 19013

Mumbai

mh@gsasmspl.com

+91 98450 42976

+91 98450 19013

Pune

mh@gsasmspl.com

+91 98450 42976

+91 98450 19013

Vizag

vizag@gsasmspl.com

+91 98450 98535

+91 98450 42981