Intelligent Universal Programmer i.e GSAS IUP-UXP is an advanced version of our earlier model GSAS IUP-XP, which works through a PC’s parallel port & USB port. It features a 48pin universal pin driver and an expandable TTL pin driver.

Universal-Programmer

This Intelligent Universal Programmer supports over 7000 devices including PAL, GAL, CEPAL, EPLD, PEEL, MAX, MACH, PLSI, EPROM, MPU /MCU etc. GSASIUP-UXP works in various operating systems, Windows, 9x/NT/2000 and XP.

  • Printer-port& USB port interface with auto– switch power
  • Supports 5V and 3.3V low voltage devices, 1.8Vchip support through low voltage adapter
  • Programming speed for high density flash chip is less than 2Sec /M bit
  • No adapter required for DIL chips up to 48 pin
  • 48 pin universal pin driver with current limit Protection
  • Auto-sense/ Self-programming with statistical report
  • Checks device insertion and pin contact
  • Optional Universal adapter for 44 pin PLCC / QFP/TQFP / PSOP and 40/48 pin TSOP
  • Supports Windows 9x, 2000,XP and NT
  • Automatic ID search for EPROM / Flash devices
  • Serialization for Memory /μP chips
  • Project file save I load function
  • User-selectable Vcc with one or two-pass verify voltage
  • Automatic file format detection and conversion
  • User-changeable programming parameters
  • Pin swapping table provided for user configurable adapters

  • Power : 100 to 240VAC, auto – switching
  • Frequency range : 47 to 63Hz
  • Power Consumption : 25W
  • Operating Temperature : 5 to 45C (41 to 113F)

  • Operating System : Windows 98 / Me / 2000 /
  • Windows XP or Windows NT
  • Processor : Pentium and above
  • RAM : 128MB Minimum
  • Hard disk : 100MB free space
  • Interface :Parallel port with EPP Mode or USB port
  • CD ROM drive : 20x and above