GW Instek GPT-12000 Series
Safety TestersElectrical safety analyzer with 200VA AC capacity, 7-inch color LCD, and AC/DC/IR/GB testing for production compliance verification. Available in India from GSAS Micro Systems.
AC Capacity
200 VA
Display
7-inch LCD color
Tests
AC, DC, IR, GB
Capacitive Load
Up to 47 uF
Ramp Control
Controllable up/down
Storage
USB flash
Overview
About GPT-12000 Series
The GPT-12000 Series is an electrical safety analyzer offering 200 VA AC test capacity with a 7-inch color LCD display for clear test parameter visualization and result review. Supporting AC withstanding voltage, DC withstanding voltage, insulation resistance, and ground bond testing, this series addresses the full scope of routine production safety compliance. Testing starts from as fast as 0.3 seconds, enabling high-throughput production line deployment.
| Model | AC Withstand | DC Withstand | Insulation Resistance | Ground Bond | Continuity | Rear Output |
|---|---|---|---|---|---|---|
| GPT-12001 | Yes | No | No | No | No | No |
| GPT-12002 | Yes | Yes | No | No | No | No |
| GPT-12003 | Yes | Yes | Yes | No | No | No |
| GPT-12004 | Yes | Yes | Yes | Yes | Yes | Yes |
| Feature | Specification |
|---|---|
| AC Test Capacity | 200 VA |
| Capacitive Load | Up to 47 uF |
| Display | 7-inch LCD color |
| Ramp Control | Programmable ramp up and down |
| Statistics | Built-in pass/fail counting |
| Test Start Time | From 0.3 seconds |
| Power Input | Universal voltage |
| Data Storage | USB flash drive |
Controllable ramp up and down rates protect capacitive DUTs from inrush damage during hipot testing, while capacitive load testing up to 47 uF accommodates devices with large input filter capacitors. The built-in statistics function tracks pass/fail counts for production yield analysis.
Manufacturing facilities testing appliances, power supplies, medical devices, and lighting products rely on the GPT-12000 for regulatory compliance verification to IEC, UL, and EN safety standards. USB flash storage enables test data archiving and traceability without a connected PC.
Watch the GPT 12000 introduction
GSAS Micro Systems provides the GPT-12000 Series in India with safety test procedure setup, production line integration, and periodic calibration services.
Blog
GW Instek Insights
Emulating Processor Power for Thermal Testing: Why Constant Power
A heat sink or a cold plate is qualified against a watt figure, not a volt figure. This application note explains why a thermal load is driven in constant-power mode, how the bench is built for air and for liquid cooling, and what to confirm before you buy.
CRPS and Rack Power Supply Testing: The Six Tests That Matter
A CRPS module has to hold up under an unbalanced grid, a 0 to 100 percent load step, a surge on the line and a redundancy handover. This application note sets out the six tests, and the one source capability that makes a long feeder reproducible on the bench.
GPU Power Board Testing: DC Input Verification Before Integration
A GPU power delivery board is cheap to reject on a bench and expensive to find in an assembled server. This application note covers the programmable DC input test that screens the board, and the same test applied to incoming server systems.
Related products
More from GW Instek
All GW Instek products →
GPT-15000 Series
Electrical safety tester with AC/DC withstand, insulation resistance, ground bond, and leakage current testing. Available in India from GSAS with hands-on application engineering and local support.
View GPT-15000 Series →
GPT-12004: 200 VA Electrical Safety Analyzer (AC/DC/IR/GB + Continuity)
GW Instek GPT-12004 is the top model of the GPT-12000 series, 200 VA AC test capacity with AC withstand, DC withstand, insulation resistance, ground bond, and continuity testing. 7-inch TFT LCD, controllable ramp, 47 µF capacitive load capability, IEC 61010-2-034 compliant. Available in India from GSAS Micro Systems for production safety compliance lines.
View GPT-12004: 200 VA Electrical Safety Analyzer (AC/DC/IR/GB + Continuity) →
GPT-9800/9900 Series
GW Instek GPT-9800/9900 hipot tester and electrical safety tester, AC withstand to 5 kV, DC to 6 kV, insulation resistance to 50 GΩ and ground bond to 32 A, with true-RMS leakage current measurement (1 µA resolution) for production safety testing. Available in India from GSAS Micro Systems, an authorized GW Instek engineering partner, with INR/GST quotes, calibration and local demos.
View GPT-9800/9900 Series →Interested in GPT-12000 Series?
Get pricing, an evaluation unit, or a technical consultation from our application engineers.