GW Instek GSP-8800
Spectrum Analyzers8.8 GHz spectrum analyzer with EMC pre-compliance, tracking generator, and -165 dBm/Hz DANL. Authorized India partner, GSAS Micro Systems.
Frequency
9 kHz to 8.8 GHz
DANL
-165 dBm/Hz
RBW
1 Hz to 3 MHz
Tracking Gen
Built-in
Display
10.1-inch touchscreen
Overview
About GSP-8800
The GSP-8800 extends GW Instek’s spectrum analyzer range to 8.8 GHz, covering Wi-Fi 6E, 5G NR FR1, and C-band satellite frequencies with a DANL of -165 dBm/Hz and RBW as fine as 1 Hz. A built-in tracking generator, EMC pre-compliance suite with CISPR detectors, and 10.1-inch touchscreen display deliver advanced RF measurement in a compact benchtop form factor.
| Feature | Specification |
|---|---|
| Frequency Range | 9 kHz to 8.8 GHz |
| DANL | -165 dBm/Hz |
| RBW | 1 Hz to 3 MHz |
| Tracking Generator | Built-in for scalar network analysis |
| EMC Pre-compliance | CISPR quasi-peak, average, peak detectors |
| Measurements | Phase noise, channel power, ACPR, OBW, spectrogram |
| Display | 10.1-inch touchscreen |
| Remote Interfaces | USB, LAN, GPIB |
Advanced measurement functions including phase noise, channel power, ACPR, occupied bandwidth, and spectrogram display address wireless device development, EMI troubleshooting, and RF system characterization across the full frequency range from audio through microwave. The 8.8 GHz upper limit ensures coverage of the latest wireless standards including Wi-Fi 6E (6 GHz band) and 5G NR FR1, making it a future-ready investment for labs working on next-generation connectivity.
The built-in EMC pre-compliance suite with CISPR-compliant detectors and limit line testing provides a cost-effective path to EMI screening before formal chamber testing, helping product development teams identify and resolve emissions issues early in the design cycle. The tracking generator enables scalar network analysis for characterizing filters, amplifiers, and antennas without additional instrumentation.
GSAS Micro Systems delivers the GSP-8800 with antenna and accessory recommendations, EMC pre-compliance setup guidance, and ongoing calibration support.
Blog
GW Instek Insights
Emulating Processor Power for Thermal Testing: Why Constant Power
A heat sink or a cold plate is qualified against a watt figure, not a volt figure. This application note explains why a thermal load is driven in constant-power mode, how the bench is built for air and for liquid cooling, and what to confirm before you buy.
CRPS and Rack Power Supply Testing: The Six Tests That Matter
A CRPS module has to hold up under an unbalanced grid, a 0 to 100 percent load step, a surge on the line and a redundancy handover. This application note sets out the six tests, and the one source capability that makes a long feeder reproducible on the bench.
GPU Power Board Testing: DC Input Verification Before Integration
A GPU power delivery board is cheap to reject on a bench and expensive to find in an assembled server. This application note covers the programmable DC input test that screens the board, and the same test applied to incoming server systems.
Related products
More from GW Instek
All GW Instek products →
GSP-9330
GW Instek GSP-9330 spectrum analyzer, a 9 kHz to 3.25 GHz RF spectrum analyzer with 1 Hz minimum RBW, fast 204 µs sweep, built-in EMC pretest (quasi-peak/average detectors), AM/FM/ASK/FSK/2FSK demodulation and an optional tracking generator. Available in India from GSAS Micro Systems, an authorized GW Instek engineering partner, with INR pricing, GST invoicing, calibration and application support.
View GSP-9330 →
GSP-9300B
3 GHz spectrum analyzer with spectrogram, topographic display, and built-in preamplifier. Available in India from GSAS with hands-on application engineering and local support.
View GSP-9300B →
GSP-730
3 GHz entry-level spectrum analyzer with ACPR, channel power, and split-window display. Authorized India partner, GSAS Micro Systems.
View GSP-730 →Interested in GSP-8800?
Get pricing, an evaluation unit, or a technical consultation from our application engineers.