GW Instek GPR-H Series Linear DC Power Supply
Power SuppliesLinear DC power supply with 0.01% high regulation, constant voltage/current operation, and low ripple output for sensitive analog circuit testing. Buy in India from GSAS.
Type
Linear DC power supply
Regulation
0.01% (CV and CC)
Models
240W to 375W
Voltage
Up to 110V / 300V (model dependent)
Protection
Overload, reverse polarity
Selection
Continuous or dynamic load
Overview
About GPR-H Series Linear DC Power Supply
The GPR-H Series linear DC power supply provides 0.01% regulation with low ripple and noise output, essential for powering sensitive analog circuits, precision sensors, and RF front-end modules during development and production test.
Constant voltage and constant current operation modes with internal selection for continuous or dynamic load support both steady-state and transient load applications. Overload protection and reverse polarity protection safeguard the DUT.
Available in power ratings from 240W to 375W with voltage ranges spanning 0–75V through 0–300V, the series covers applications from bench-level prototype testing to production line power sourcing. The linear topology eliminates switching noise, making GPR-H the preferred choice when measurement sensitivity demands the lowest possible supply noise floor.
Blog
GW Instek Insights
Emulating Processor Power for Thermal Testing: Why Constant Power
A heat sink or a cold plate is qualified against a watt figure, not a volt figure. This application note explains why a thermal load is driven in constant-power mode, how the bench is built for air and for liquid cooling, and what to confirm before you buy.
CRPS and Rack Power Supply Testing: The Six Tests That Matter
A CRPS module has to hold up under an unbalanced grid, a 0 to 100 percent load step, a surge on the line and a redundancy handover. This application note sets out the six tests, and the one source capability that makes a long feeder reproducible on the bench.
GPU Power Board Testing: DC Input Verification Before Integration
A GPU power delivery board is cheap to reject on a bench and expensive to find in an assembled server. This application note covers the programmable DC input test that screens the board, and the same test applied to incoming server systems.
Related products
More from GW Instek
All GW Instek products →
ASR-6000 Series
GW Instek ASR-6000 Series high-performance programmable AC/DC power source, a third-generation SiC-based regenerative-grade AC DC power source family (ASR-6450 4.5 kVA, ASR-6500 5 kVA, ASR-6600 6 kVA, ASR-6660 6.6 kVA) delivering up to 350 Vrms phase / 700 Vrms line and ±500 V DC in a 4U chassis, with 10 output modes, single- and three-phase AC output (1P2W/1P3W/3P4W), 100th-order harmonic analysis and rack-parallel expansion to 39.6 kVA. Available as an AC power source in India from GSAS Micro Systems, an authorized GW Instek engineering partner, with application engineering, calibration and nationwide support.
View ASR-6000 Series →
ASR-3000 Series
Compact programmable AC/DC power source up to 5kVA with high-frequency mode, power analysis, and IEC harmonics testing. Available in India from GSAS with hands-on application engineering and local support.
View ASR-3000 Series →
ASR-2000 Series
Programmable AC/DC power source with voltage/current harmonic analysis, arbitrary waveform, and sequence functions. Available in India from GSAS with hands-on application engineering and local support.
View ASR-2000 Series →Interested in GPR-H Series Linear DC Power Supply?
Get pricing, an evaluation unit, or a technical consultation from our application engineers.