GW Instek MFG-2000 Series
Signal SourcesMulti-channel function generator with up to 5 isolated output channels and 320 MHz RF. Buy in India from GSAS Micro Systems.
Channels
Up to 5
Frequency
1 µHz to 320 MHz
Sampling
200 MSa/s
Resolution
14-bit (MFG-2220HM)
Display
4.3-inch TFT color
Overview
About MFG-2000 Series
The MFG-2000 Series is GW Instek’s multi-channel function generator platform offering up to five isolated output channels, two equivalent-performance arbitrary channels, an RF channel, a pulse channel, and a power amplifier channel. The isolated channel design with earth ground isolation prevents ground loops and enables true differential signal generation. A 200 MSa/s true point-by-point output architecture with 16k memory ensures accurate reproduction of complex arbitrary waveforms.
| Feature | MFG-2220HM | MFG-2200 | MFG-2100 |
|---|---|---|---|
| Channels | 3 | 5 | 5 |
| Max Frequency | 200 MHz | 60 MHz | 10/20/30/50 MHz |
| Sampling Rate | 250 MSa/s | 200 MSa/s | 200 MSa/s |
| Resolution | 14-bit | 14-bit | 14-bit |
| Repetition Rate | 125 MHz | - | - |
| Arbitrary Memory | 16k pts | 16k pts | 16k pts |
| RF Channel | Yes | 160/320 MHz | 160/320 MHz |
| Modulation | AM/FM/PM/ASK/FSK/PSK/SUM/PWM | AM/FM/PM/ASK/FSK/PSK/SUM/PWM | AM/FM/PM/ASK/FSK/PSK/SUM/PWM |
The MFG-2220HM delivers the highest single-channel performance at 200 MHz with 250 MSa/s and 125 MHz repetition rate, suited for high-speed digital and RF stimulus applications. The MFG-2200 and MFG-2100 expand to five channels for complex multi-signal test setups where simultaneous independent outputs are required, such as driving sensors, clocks, and communication interfaces in parallel during system-level validation.
Comprehensive modulation capabilities including AM, FM, PM, ASK, FSK, PSK, SUM, and PWM address wireless protocol emulation, power supply testing, and mixed-signal stimulus needs on the 4.3-inch TFT color display.
GSAS Micro Systems provides the full MFG-2000 Series lineup across India with channel configuration guidance, application support, and calibration services.
Blog
GW Instek Insights
Emulating Processor Power for Thermal Testing: Why Constant Power
A heat sink or a cold plate is qualified against a watt figure, not a volt figure. This application note explains why a thermal load is driven in constant-power mode, how the bench is built for air and for liquid cooling, and what to confirm before you buy.
CRPS and Rack Power Supply Testing: The Six Tests That Matter
A CRPS module has to hold up under an unbalanced grid, a 0 to 100 percent load step, a surge on the line and a redundancy handover. This application note sets out the six tests, and the one source capability that makes a long feeder reproducible on the bench.
GPU Power Board Testing: DC Input Verification Before Integration
A GPU power delivery board is cheap to reject on a bench and expensive to find in an assembled server. This application note covers the programmable DC input test that screens the board, and the same test applied to incoming server systems.
Related products
More from GW Instek
All GW Instek products →
GSP-8800
8.8 GHz spectrum analyzer with EMC pre-compliance, tracking generator, and -165 dBm/Hz DANL. Authorized India partner, GSAS Micro Systems.
View GSP-8800 →
GSP-9330
GW Instek GSP-9330 spectrum analyzer, a 9 kHz to 3.25 GHz RF spectrum analyzer with 1 Hz minimum RBW, fast 204 µs sweep, built-in EMC pretest (quasi-peak/average detectors), AM/FM/ASK/FSK/2FSK demodulation and an optional tracking generator. Available in India from GSAS Micro Systems, an authorized GW Instek engineering partner, with INR pricing, GST invoicing, calibration and application support.
View GSP-9330 →
GSP-9300B
3 GHz spectrum analyzer with spectrogram, topographic display, and built-in preamplifier. Available in India from GSAS with hands-on application engineering and local support.
View GSP-9300B →Interested in MFG-2000 Series?
Get pricing, an evaluation unit, or a technical consultation from our application engineers.