GW Instek MSO-2000E
OscilloscopesMixed-signal oscilloscope with 4 analog channels, 16 digital channels, up to 200 MHz bandwidth, and serial bus decoding. Available in India from GSAS with hands-on application engineering and local support.
Bandwidth
70/100/200 MHz
Channels
4 analog + 16 digital
Sampling
1 GSa/s
Memory
10 M per channel
Serial Decode
I2C, SPI, UART, CAN, LIN
AWG
Dual 25 MHz built-in
Overview
About MSO-2000E
The GW Instek MSO-2000E series is a mixed-signal oscilloscope that combines 4 analog channels with 16 digital logic channels for simultaneous time-correlated capture of analog waveforms and digital bus activity. Available in 70, 100, and 200 MHz bandwidth variants, the MSO-2000E provides embedded systems engineers with the channel count needed to debug microcontroller systems where analog signals and digital buses must be observed together.
The 16 digital channels capture address, data, and control lines alongside analog measurements, making it possible to correlate processor bus activity with power supply behavior, sensor outputs, and communication interface signals in a single acquisition. VPO (Visual Persistence Oscilloscope) waveform technology at 120,000 wfm/s update rate reveals intermittent signal anomalies that conventional display modes miss.
MSO-2000E Specifications
| Feature | Specification |
|---|---|
| Bandwidth | 70 / 100 / 200 MHz |
| Analog Channels | 4 |
| Digital Channels | 16 (MSO) |
| Sampling Rate | 1 GSa/s |
| Memory Depth | 10 Mpts per channel |
| Waveform Update | 120,000 wfm/s (VPO) |
| Serial Decode | I2C, SPI, UART, CAN, LIN |
| Built-in AWG | Dual-channel, 25 MHz |
| Mask Test | Automated waveform compliance |
| Display | 8-inch WVGA LCD |
Built-in serial bus decoding for I2C, SPI, UART, CAN, and LIN protocols, a dual-channel 25 MHz arbitrary waveform generator, and mask testing for automated pass/fail waveform compliance make the MSO-2000E a capable all-in-one embedded development instrument. The 16-channel MSO capability is integrated, not an add-on option, providing mixed-signal debugging at a lower total cost than purchasing separate oscilloscope and logic analyzer instruments. GSAS Micro Systems provides the MSO-2000E with bandwidth selection guidance, probe recommendations, and after-sales service for embedded development and education labs across India.
Blog
GW Instek Insights
Emulating Processor Power for Thermal Testing: Why Constant Power
A heat sink or a cold plate is qualified against a watt figure, not a volt figure. This application note explains why a thermal load is driven in constant-power mode, how the bench is built for air and for liquid cooling, and what to confirm before you buy.
CRPS and Rack Power Supply Testing: The Six Tests That Matter
A CRPS module has to hold up under an unbalanced grid, a 0 to 100 percent load step, a surge on the line and a redundancy handover. This application note sets out the six tests, and the one source capability that makes a long feeder reproducible on the bench.
GPU Power Board Testing: DC Input Verification Before Integration
A GPU power delivery board is cheap to reject on a bench and expensive to find in an assembled server. This application note covers the programmable DC input test that screens the board, and the same test applied to incoming server systems.
Related products
More from GW Instek
All GW Instek products →
GDS-3104A
1 GHz 4-channel digital storage oscilloscope with 5 GSa/s sampling, 200 Mpts memory, and 13 power analysis tests. Authorized India partner, GSAS Micro Systems.
View GDS-3104A →
GDS-3102A
1 GHz 2-channel digital storage oscilloscope with 5 GSa/s sampling, 200 Mpts memory, power analysis, and spectrogram display. Buy in India from GSAS Micro Systems.
View GDS-3102A →
MPO-2204P
200 MHz programmable oscilloscope with built-in Python scripting, AWG, DMM, and power supply. Available in India from GSAS with hands-on application engineering and local support.
View MPO-2204P →Interested in MSO-2000E?
Get pricing, an evaluation unit, or a technical consultation from our application engineers.