GW Instek PEL-500 Series
Electronic LoadsDC electronic load with 5-digit metering, battery discharge testing, surge mode, and CC/CR/CV/CP/dynamic modes. Available in India from GSAS with hands-on application engineering and local support.
Display
5-digit V, I, W simultaneous
Modes
CC, CR, CV, CP, Dynamic
Battery Test
Vbatt/AH/WH/time stop
Surge Test
Boot overshoot & hot plug
Protection
Auto OCP/OPP
Interface
RS-232, USB
Overview
About PEL-500 Series
The PEL-500 Series is a DC electronic load featuring a 5-digit digital meter with simultaneous display of voltage, current, and power for real-time monitoring during test execution. Operating modes include CC, CR, CV, CP, and dynamic loading, covering a broad range of power supply and battery testing requirements. Built-in battery discharge testing with configurable stop conditions (voltage, amp-hours, watt-hours, time) simplifies battery characterization workflows.
| Feature | Specification |
|---|---|
| Display | 5-digit voltage, current, and power |
| Simultaneous Readback | V, I, W on screen at once |
| Operating Modes | CC, CR, CV, CP, Dynamic |
| Battery Discharge | Vbatt, AH, WH, time-based stop |
| Surge Test | Boot overshoot and hot plug transient |
| Short-Circuit Time | Configurable duration |
| Voltage Polarity | Automatic +/- display |
| Protection | Automatic overcurrent and overpower |
| Interface | RS-232, USB |
The surge test function validates power supply startup behavior by measuring boot-up overshoot and hot-plugging transient response, ensuring that voltage spikes remain within safe limits for downstream components. Configurable short-circuit timing allows engineers to verify power supply behavior under sustained fault conditions.
Battery manufacturers, adapter designers, and production test teams use the PEL-500 for discharge profiling, load regulation verification, and incoming inspection of DC power sources. The automatic overcurrent and overpower protection ensures safe unattended operation during extended test runs.
GSAS Micro Systems offers the PEL-500 Series in India with application guidance, integration support, and calibration services.
Blog
GW Instek Insights
Emulating Processor Power for Thermal Testing: Why Constant Power
A heat sink or a cold plate is qualified against a watt figure, not a volt figure. This application note explains why a thermal load is driven in constant-power mode, how the bench is built for air and for liquid cooling, and what to confirm before you buy.
CRPS and Rack Power Supply Testing: The Six Tests That Matter
A CRPS module has to hold up under an unbalanced grid, a 0 to 100 percent load step, a surge on the line and a redundancy handover. This application note sets out the six tests, and the one source capability that makes a long feeder reproducible on the bench.
GPU Power Board Testing: DC Input Verification Before Integration
A GPU power delivery board is cheap to reject on a bench and expensive to find in an assembled server. This application note covers the programmable DC input test that screens the board, and the same test applied to incoming server systems.
Related products
More from GW Instek
All GW Instek products →
AEL-5000 Series
GW Instek AEL-5000 programmable AC & DC electronic load, 20 models from 1.875 kW to 22.5 kW per unit, scalable to 180 kW single-phase and a 540 kW three-phase electronic load in parallel, with Turbo Mode and an AC Rectifier Load Mode for regenerative-grade load testing of UPS, inverters, fuses and breakers. Available in India from GSAS Micro Systems, an authorized GW Instek engineering partner.
View AEL-5000 Series →
PEL-5000G Series
GW Instek PEL-5000G high power DC electronic load, a 1200 V programmable DC load with 4 kW to 6 kW per module across 150 V / 600 V / 1200 V families, Turbo Mode for 1.5x current and power, CV-mode parallel operation, Surge and BMS test modes, and 5-digit V/A/W readback. Available in India from GSAS Micro Systems with system sizing, parallel configuration and after-sales support.
View PEL-5000G Series →
PEL-5000C Series
GW Instek PEL-5000C high-power compact programmable DC electronic load, 150V / 600V / 1200V models, 6kW to 24kW per unit, up to 8 units in master/slave parallel for a 192kW electronic load, with CC/CR/CV/CP, dynamic, battery-test and solar-MPPT-test modes for EV charger, EV battery and solar panel validation. The high power DC load India teams choose for battery, charging-station and renewable-energy test, available from GSAS Micro Systems, an authorized GW Instek engineering partner, with application engineering, calibration and local support.
View PEL-5000C Series →Interested in PEL-500 Series?
Get pricing, an evaluation unit, or a technical consultation from our application engineers.