Skip to main content
GW Instek SPS-A Series 360 W Switching DC Power Supply
GW Instek GW Instek

SPS-A Series 360 W Switching DC Power Supply

Power Supplies

GW Instek SPS-A single-channel 360 W switching DC power supply in five models from 12 V/30 A to 60 V/6 A, with an encoder knob, 2.4-inch colour LCD, remote sensing and OVP/OCP/OTP. Available in India from GSAS Micro Systems.

Models

SPS-1230A, SPS-1820A, SPS-2415A, SPS-3610A, SPS-606A

Output

1 channel, 360 W

Voltage / Current

12 V/30 A, 18 V/20 A, 24 V/15 A, 36 V/10 A, 60 V/6 A

CV Ripple & Noise

≤ 5 mVrms (5 Hz to 1 MHz)

Setting Resolution

10 mV (≤ 36 V) or 20 mV (> 36 V); 10 mA

Protection

OVP, OCP, OTP

Display

2.4-inch TFT LCD

Interface

Remote I/O with status signal outputs

Authorized partner since 2012
Local FAE & application engineering
Hands-on training & integration
Manufacturer warranty

About SPS-A Series 360 W Switching DC Power Supply

The GW Instek SPS-A Series is a single-channel 360 W switching DC power supply in five models, from 12 V / 30 A to 60 V / 6 A. GW Instek describes it as the new generation of its SPS switching supplies, with an encoder digital control knob for voltage and current setting and a 2.4-inch TFT colour LCD. Remote sensing, built-in OVP, OCP and OTP, three memory presets and a front-panel lock make it suited to R&D benches, teaching labs and production lines.

GW Instek SPS-1230A 360 W switching DC power supply, available in India from GSAS Micro Systems

SPS-A model lineup

ModelVoltageCurrentPower
SPS-1230A0 V to 12 V0 A to 30 A360 W
SPS-1820A0 V to 18 V0 A to 20 A360 W
SPS-2415A0 V to 24 V0 A to 15 A360 W
SPS-3610A0 V to 36 V0 A to 10 A360 W
SPS-606A0 V to 60 V0 A to 6 A360 W

Key specifications

SpecificationSPS-A Series
CV line / load regulation≤ 5 mV / ≤ 5 mV
CV ripple and noise (5 Hz to 1 MHz)≤ 5 mVrms
CC line / load regulation≤ 3 mA / ≤ 10 mA
CC ripple and noise≤ 30 mArms (SPS-1230A), ≤ 10 mArms (SPS-1820A, SPS-2415A), ≤ 5 mArms (SPS-3610A), ≤ 3 mArms (SPS-606A)
Recovery time≤ 500 µs (50% to 100% load change)
Setting resolution10 mV (≤ 36 V), 20 mV (> 36 V); 10 mA
Readback resolution10 mV; 2 mA (SPS-1230A, SPS-1820A), 1 mA (other models)
Voltage setting / readback accuracy±(0.1% of reading + 30 mV) up to 36 V; ±(0.1% of reading + 60 mV) above 36 V
Remote sensing2-wire / 4-wire, up to 0.5 V compensation
ProtectionOVP and OCP (5% to 105% of rating), OTP
Memory3 store/recall presets plus a power-on default
Display / interface2.4-inch TFT LCD; Remote I/O with status outputs (Output ON/OFF, CV, CC, ALM, PWR ON)
AC input115 V / 230 V ±15%, 50/60 Hz; 900 VA
Dimensions / weight107 × 124 × 363 mm (W × H × D); approx. 3.6 kg

Encoder control, colour display and protection

GW Instek fits the SPS-A with an encoder-type digital knob for faster and finer voltage and current adjustment, and a 2.4-inch colour LCD for monitoring output status. Remote sensing with 2-wire/4-wire switching corrects for voltage drop in the load leads. OVP, OCP and OTP respond to fault conditions to protect the device under test and the supply. A dedicated Output On/Off key lets operators finish settings before enabling the output, and the panel lock prevents accidental changes during long tests.

Status outputs and rack mounting

The SPS-A is a front-panel instrument with a Remote I/O port that reports Output ON/OFF, CV, CC, alarm and power-on status. The datasheet does not list a USB, RS-232 or LAN programming interface, so for SCPI-controlled systems choose one of GW Instek’s programmable DC supplies on the GW Instek partner page. The GRA-441-J (JIS) and GRA-441-E (EIA) rack-mount kits fit the SPS-A into a test rack.

Applications

GW Instek positions the SPS-A for scientific research and experimental testing, battery charge and discharge testing, electronic component measurement and consumer electronics testing, with schools, research institutions, energy storage, semiconductor and consumer electronics companies as its customer segments.

Buy the SPS-A Series in India from GSAS Micro Systems

GSAS Micro Systems is an authorized GW Instek engineering partner for Karnataka, Andhra Pradesh and Telangana, supporting customers across India. We help you choose the voltage and current rating, configure rack kits and leads, and provide GST-compliant quotations and local support for teams in Bengaluru, Hyderabad, Chennai, Pune, Mumbai and Delhi NCR. Request a quote or read our SPS-A and GDS-2000HD/HG launch post.

Common questions about SPS-A Series 360 W Switching DC Power Supply

Which SPS-A model should I choose?
All five models deliver 360 W from one channel; they differ in the voltage and current split. The SPS-1230A gives 12 V at 30 A, the SPS-1820A 18 V at 20 A, the SPS-2415A 24 V at 15 A, the SPS-3610A 36 V at 10 A and the SPS-606A 60 V at 6 A. Pick the lowest voltage rating that covers your device under test, which gives you the most current.
Can the SPS-A be programmed from a PC over USB or LAN?
GW Instek lists the SPS-A interface as Remote I/O, with status signal outputs for Output ON/OFF, CV, CC, ALM and PWR ON. The datasheet does not list a USB, RS-232 or LAN programming interface.
Does the SPS-A support remote sensing?
Yes. The SPS-A switches between 2-wire and 4-wire sensing to compensate for voltage drop in the load leads, with a maximum remote sensing compensation voltage of 0.5 V.
How do I buy the GW Instek SPS-A Series in India?
GSAS Micro Systems is an authorized GW Instek engineering partner for Karnataka, Andhra Pradesh and Telangana, supporting customers across India. Request a quote with your voltage and current requirement for INR pricing, a GST-compliant quotation and rack-mount options.

Interested in SPS-A Series 360 W Switching DC Power Supply?

Get pricing, an evaluation unit, or a technical consultation from our application engineers.

Request a Quote Demo