Sensepeek PCBite Kit with 2x SQ200 200 MHz Probes
ProbesHands-free PCB probing kit with 2x SQ200 200 MHz oscilloscope probes (10:1, 300V CAT II), 4x SQ10 probes, A4 base plate, and magnetic holders. Buy in India from GSAS.
Oscilloscope Probes
2x SQ200 (200 MHz, 10:1)
General Probes
4x SQ10 (10 MHz, 1:1)
Max Input Voltage
300V RMS CAT II (SQ200)
Input Impedance
10 M-ohm (SQ200)
Base Plate
DIN A4, stainless steel
Probe Tip
0.5 mm spring-loaded needle
Overview
About PCBite Kit with 2x SQ200 200 MHz Probes
The PCBite Kit with 2x SQ200 probes combines Sensepeek’s hands-free probing platform with 200 MHz bandwidth oscilloscope probes for embedded system debugging and signal analysis. The kit includes two SQ200 passive 10:1 oscilloscope probes rated at 300V RMS CAT II, four SQ10 general-purpose 1:1 probes, four CNC-machined aluminum PCB holders, and the A4 stainless steel base plate. The SQ200 probes feature 10 M-ohm input impedance and support automatic 10:1 probe detection on compatible oscilloscopes, making them a direct upgrade path for teams already using the SQ10 starter kit.
The SQ200 probes are fully insulated, allowing safe handheld use alongside hands-free operation on the PCBite base plate. The 200 MHz bandwidth covers the majority of embedded system debugging scenarios, SPI clock validation, I2C bus integrity, PWM waveform analysis, and UART signal quality checks. The 300V CAT II voltage rating makes the SQ200 suitable for power supply measurements, motor drive debugging, and automotive ECU development where higher voltages are present. Each probe includes exchangeable spring-loaded test needles, multiple ground options, and color-coded cable holders for organized multi-channel measurements.
Watch the PCBite Kit with SQ200 probes introduction
Why GSAS for Sensepeek PCBite in India
GSAS is Sensepeek’s authorized engineering partner in India, providing INR invoicing, evaluation units, and probing setup guidance from offices in Bengaluru, Hyderabad, Chennai, Pune, Mumbai, and Delhi NCR. Contact GSAS from Bengaluru to Delhi NCR for pricing and probe selection guidance.
Blog
Sensepeek Insights
Shrinking Boards, Growing Problems: Why Hands-Free Probing Is Essential as Component Density Rises
As PCBs shrink to 0201 components, QFN packages, and BGA-only processors, traditional probing methods fail. Here is why the Sensepeek PCBite hands-free system is becoming essential for modern hardware debug.
Getting Started with Sensepeek PCBite: Unboxing to First Measurement
Step-by-step tutorial for setting up a Sensepeek PCBite kit, from unboxing and base plate preparation through probe attachment, ground connection, and your first hands-free oscilloscope measurement.
High-Speed Interface Validation with Sensepeek SQG Probes: USB, HDMI, and SATA
How to use Sensepeek SQG high-frequency probes for signal integrity validation on USB, HDMI, SATA, and PCIe interfaces, probe selection by data rate, AC vs DC coupling, and ground strategy.
Related products
More from Sensepeek
All Sensepeek products →
PCBite Kit with 4x SQ10 Probes
Complete hands-free PCB probing kit with A4 stainless steel base plate, 4 magnetic PCB holders, 4 SQ10 probes (10 MHz, 1:1), and test wires. Buy in India from GSAS, authorized Sensepeek partner.
View PCBite Kit with 4x SQ10 Probes →
PCBite Kit with 2x SQ500 500 MHz Probes
Premium hands-free PCB probing kit with 2x SQ500 500 MHz oscilloscope probes (10:1, 300V CAT II), 4x SQ10 probes, A4 base plate, and magnetic holders. Buy in India from GSAS.
View PCBite Kit with 2x SQ500 500 MHz Probes →Interested in PCBite Kit with 2x SQ200 200 MHz Probes?
Get pricing, an evaluation unit, or a technical consultation from our application engineers.