Sensepeek PCBite Kit with 2x SQ500 500 MHz Probes
ProbesPremium hands-free PCB probing kit with 2x SQ500 500 MHz oscilloscope probes (10:1, 300V CAT II), 4x SQ10 probes, A4 base plate, and magnetic holders. Buy in India from GSAS.
Oscilloscope Probes
2x SQ500 (500 MHz, 10:1)
General Probes
4x SQ10 (10 MHz, 1:1)
Max Input Voltage
300V RMS CAT II (SQ500)
Input Capacitance
9 pF (SQ500)
Base Plate
DIN A4, stainless steel
Probe Tip
0.5 mm spring-loaded needle
Overview
About PCBite Kit with 2x SQ500 500 MHz Probes
The PCBite Kit with 2x SQ500 probes is Sensepeek’s highest-bandwidth hands-free oscilloscope probing kit, pairing 500 MHz passive 10:1 probes with the complete PCBite platform. The SQ500 probes deliver 300V RMS CAT II voltage rating with just 9 pF input capacitance, the lowest in the SQ series, minimizing capacitive loading on high-speed signals. The kit includes two SQ500 probes, four SQ10 general-purpose probes, four magnetic PCB holders, and the A4 stainless steel base plate.
At 500 MHz bandwidth, the SQ500 probes capture fast-edge digital signals, high-speed serial interfaces (USB 2.0, LVDS, MIPI), and switching power supply transients with minimal signal distortion. The probes connect to any oscilloscope with 1 M-ohm input impedance and support automatic 10:1 probe scaling. Like all SQ-series probes, the SQ500 is fully insulated for dual-mode operation, hands-free on the magnetic base plate or handheld for quick measurements. Exchangeable fine-pitch spring-loaded test needles, dual ground options, and color-coded cable holders complete the measurement setup.
The kit also includes an A4 insulation cover for the base plate, yellow insulation washers for board protection, extra replacement test needles, and a microfiber cleaning cloth.
Watch the PCBite Kit with SQ500 probes introduction
Why GSAS for Sensepeek PCBite in India
GSAS is Sensepeek’s authorized engineering partner in India, providing INR invoicing, evaluation units, and probing expertise from offices in Bengaluru, Hyderabad, Chennai, Pune, Mumbai, and Delhi NCR. Our application engineers help teams select the right bandwidth kit and integrate Sensepeek probes with oscilloscopes and analyzers in their test setup. Contact GSAS from Bengaluru to Delhi NCR for pricing, volume quotes, and evaluation programs.
Blog
Sensepeek Insights
Shrinking Boards, Growing Problems: Why Hands-Free Probing Is Essential as Component Density Rises
As PCBs shrink to 0201 components, QFN packages, and BGA-only processors, traditional probing methods fail. Here is why the Sensepeek PCBite hands-free system is becoming essential for modern hardware debug.
Getting Started with Sensepeek PCBite: Unboxing to First Measurement
Step-by-step tutorial for setting up a Sensepeek PCBite kit, from unboxing and base plate preparation through probe attachment, ground connection, and your first hands-free oscilloscope measurement.
High-Speed Interface Validation with Sensepeek SQG Probes: USB, HDMI, and SATA
How to use Sensepeek SQG high-frequency probes for signal integrity validation on USB, HDMI, SATA, and PCIe interfaces, probe selection by data rate, AC vs DC coupling, and ground strategy.
Related products
More from Sensepeek
All Sensepeek products →
PCBite Kit with 4x SQ10 Probes
Complete hands-free PCB probing kit with A4 stainless steel base plate, 4 magnetic PCB holders, 4 SQ10 probes (10 MHz, 1:1), and test wires. Buy in India from GSAS, authorized Sensepeek partner.
View PCBite Kit with 4x SQ10 Probes →
PCBite Kit with 2x SQ200 200 MHz Probes
Hands-free PCB probing kit with 2x SQ200 200 MHz oscilloscope probes (10:1, 300V CAT II), 4x SQ10 probes, A4 base plate, and magnetic holders. Buy in India from GSAS.
View PCBite Kit with 2x SQ200 200 MHz Probes →Available across India
Interested in PCBite Kit with 2x SQ500 500 MHz Probes?
Get pricing, an evaluation unit, or a technical consultation from our application engineers.