Sensepeek: Buy in India
Authorized India Partner · GSAS Micro Systems
Sensepeek × GSAS
Sensepeek AB (Vellinge, Sweden, founded 2015) is a privately owned R&D company that designs and manufactures the PCBite hands-free probing system and a family of passive oscilloscope probes spanning 10 MHz to 6 GHz. Co-founded by Magnus Birch, Sensepeek has focused since 2016 on solving a fundamental problem in electronics development: engineers have only two hands but need to position multiple probes, hold solder, and manipulate PCBs simultaneously. The PCBite system, magnetic base plates, articulating probe holders, and spring-loaded test needles, eliminates the need for a third hand and delivers rock-solid, repeatable probe contact on fine-pitch components down to 0.5 mm.
GSAS is Sensepeek's authorized India partner, providing PCBite kits, SQ-series oscilloscope probes, and SQG high-frequency probes with hands-on application engineering, evaluation units, and technical support from offices in Bengaluru, Hyderabad, Chennai, Pune, Mumbai, and Delhi NCR.
Product Families
Sensepeek Products by Category
PCBite Hands-Free Probing System: Buy in India
The PCBite system is a magnetic hands-free probing platform for PCB development, debugging, and inspection. A mirror-polished stainless steel base plate (DIN A4, 297 x 210 mm) holds up to four CNC-machined aluminum PCB holders with powerful magnets, lock your board in place, position articulating probe arms with spring-loaded test needles, and measure with both hands free. The 0.5 mm probe tip diameter reaches fine-pitch QFP, BGA breakout, and 0402 components that conventional clips cannot access. Available as complete kits with SQ10, SQ200, SQ350, or SQ500 probes for bandwidths from 10 MHz to 500 MHz.
SQ-Series Oscilloscope Probes: Buy in India
The SQ-series delivers insulated hands-free oscilloscope probes from 10 MHz to 500 MHz with 10:1 passive attenuation (SQ200/SQ350/SQ500) or 1:1 direct connection (SQ10). All SQ probes are fully insulated for safe handheld use and feature a lower center of gravity for improved stability on the PCBite base plate. Spring-loaded exchangeable test needles, color-coded cable holders, and 300V CAT II rating (SQ200/SQ350/SQ500) make them suitable for power electronics, motor drive, and automotive ECU measurements. Compatible with any oscilloscope with 1 M-ohm input impedance and automatic 10:1 probe detection.
SQG-Series High-Frequency Probes up to 6 GHz: Buy in India
The SQG-series extends PCBite probing to 1.5 GHz, 3 GHz, and 6 GHz with 10:1 passive attenuation and 500-ohm probe tip impedance. Each model is available in AC-coupled and DC-coupled variants. The SQG probes deliver exceptionally low probe-tip capacitance (as low as 0.35 pF on the SQG30), flat frequency response, and sub-200 ps rise times, ideal for high-speed serial interfaces, RF signal integrity, and GHz-class digital bus validation. SMA output connectors interface directly with 50-ohm oscilloscopes, spectrum analyzers, and network analyzers. Dual ground options, 2.3 mm dual-needle for PCB-mounted RF connectors and 6.5 mm single ground for wider spacing, ensure clean ground contact in any layout.
Why GSAS for Sensepeek in India
GSAS is Sensepeek's authorized engineering partner in India, providing hands-on probing expertise, application engineering, and local technical support across six offices, Bengaluru, Hyderabad, Chennai, Pune, Mumbai, and Delhi NCR. Whether you need a complete PCBite hands-free probing system for your R&D lab, SQ-series oscilloscope probes for power electronics validation, or SQG high-frequency probes for GHz-class signal integrity work, GSAS delivers evaluation units, kit configuration guidance, and integration support with oscilloscopes from GW Instek, Pico Technology, and Digilent. Contact us for volume pricing, evaluation programs, INR invoicing, and probe selection guidance from Bengaluru to Delhi NCR. Our application engineers in Chennai, Pune, and Hyderabad are ready to help you build the optimal hands-free measurement setup for your embedded development workflow.
Why GSAS
Why Choose GSAS as Your Sensepeek Engineering Partner
6 GHz
Max Bandwidth
3
Probe Families
Pan-India
Coverage
- Probing expertise: application engineering for hands-free PCB measurement setups, oscilloscope probe selection, and high-frequency signal integrity verification
- Evaluation units available from Bengaluru, Hyderabad, Chennai, Pune, Mumbai, and Delhi NCR
- Kit configuration guidance: helping teams select the right PCBite kit and probe combination for their bandwidth, voltage, and measurement requirements
- Integration support: combining Sensepeek probes with GW Instek, Pico Technology, and Digilent oscilloscopes in complete test benches
- Local procurement: INR invoicing on all Sensepeek products (PCBite kits, SQ-series oscilloscope probes, and SQG high-frequency probes) with GeM, SAP Ariba, Coupa, and TReDS support
Sensepeek's India design and customer footprint clusters in Bengaluru, India's largest embedded systems and semiconductor design hub. Read our Bengaluru engineering ecosystem guide →
Available across India
Sensepeek by City
Blog
Sensepeek Insights
Shrinking Boards, Growing Problems: Why Hands-Free Probing Is Essential as Component Density Rises
As PCBs shrink to 0201 components, QFN packages, and BGA-only processors, traditional probing methods fail. Here is why the Sensepeek PCBite hands-free system is becoming essential for modern hardware debug.
Getting Started with Sensepeek PCBite: Unboxing to First Measurement
Step-by-step tutorial for setting up a Sensepeek PCBite kit, from unboxing and base plate preparation through probe attachment, ground connection, and your first hands-free oscilloscope measurement.
High-Speed Interface Validation with Sensepeek SQG Probes: USB, HDMI, and SATA
How to use Sensepeek SQG high-frequency probes for signal integrity validation on USB, HDMI, SATA, and PCIe interfaces, probe selection by data rate, AC vs DC coupling, and ground strategy.
6 Simultaneous Probe Points: Multi-Point Measurement with Sensepeek PCBite
How to set up 6 simultaneous measurement points on a single PCB using Sensepeek's PCBite platform, practical techniques for power supply debugging, timing analysis, and multi-rail correlation.
Sensepeek PCBite Oscilloscope Compatibility: PicoScope, Keysight, Tektronix, R&S, and GW Instek
A compatibility guide for Sensepeek PCBite probes with major oscilloscope brands, connection types, impedance matching, probe detection, and what to verify before pairing your scope with SQ and SQG probes.
Passive 6 GHz Probes Gaining Ground Over Active: The Case for Sensepeek SQG
Why passive high-frequency probes like the Sensepeek SQG series are becoming a viable alternative to active probes for GHz-class signal integrity work, noise floor, dynamic range, ESD tolerance, and cost.
Sensepeek PCBite Kit Buying Guide: SQ10-Only vs SQ200 Kit vs SQ500 Kit
A practical buying guide comparing the three Sensepeek PCBite kit configurations, SQ10-only starter kit, SQ200+SQ10 mid-range kit, and SQ500+SQ10 premium kit, to help you choose the right one for your lab.
Power Supply Debugging with Sensepeek PCBite: Ripple, Transients, and Voltage Rail Testing
How to use Sensepeek PCBite probes for DC-DC converter ripple measurement, voltage rail testing, load transient capture, and power sequencing validation on embedded boards.
Sensepeek PCBite Probe Maintenance: Replacing Needles, Cleaning, and Preserving Accuracy
The Sensepeek PCBite system is mechanically simple, stainless steel base plate, aluminum holders, articulating arms, and spring-loaded needle probes.
Sensepeek SQ vs SP Series: What Changed and Should You Upgrade?
A comparison of Sensepeek's new SQ-series probes against the original SP-series, insulated bodies, lower center of gravity, exchangeable needles, and whether upgrading makes sense for your lab.
Probing 0402 Pads and QFN Pins: Fine-Pitch SMD Debugging with Sensepeek PCBite
How to probe 0402 components, QFN packages, and BGA breakout pads using Sensepeek's spring-loaded needle probes and PCBite magnetic positioning system.
PCBite Hands-Free Probing: Why Engineers Are Switching from Clip-On Leads
A deep dive into the Sensepeek PCBite system, magnetic base plate, spring-loaded probes, and hands-free oscilloscope/multimeter measurements for embedded hardware debugging.
Ready to Get Started with Sensepeek?
Get pricing, evaluation units, or a technical consultation from our application engineers across India.