Sensepeek Sensepeek SQ200 200 MHz Hands-Free Oscilloscope Probe
Probes200 MHz passive 10:1 hands-free oscilloscope probe with 300V CAT II rating, 10 M-ohm impedance, insulated body, and PCBite magnetic mount. Buy in India from GSAS.
Bandwidth
200 MHz (-3 dB)
Attenuation
10:1
Input Impedance
10 M-ohm
Input Capacitance
13.9 pF
Max Input Voltage
300V RMS CAT II
Probe Tip Diameter
0.5 mm
Overview
About Sensepeek SQ200 200 MHz Hands-Free Oscilloscope Probe
The Sensepeek SQ200 is a 200 MHz passive 10:1 hands-free oscilloscope probe designed for embedded system debugging and signal analysis on the PCBite platform. With 10 M-ohm input impedance and 13.9 pF input capacitance, the SQ200 is compatible with any oscilloscope featuring a 1 M-ohm input and automatic 10:1 probe detection. The 300V RMS CAT II voltage rating makes the SQ200 suitable for power supply measurements, motor drive debugging, and automotive ECU development where voltages exceed typical logic levels.
The SQ200 features an insulated body for dual-mode operation, hands-free on the PCBite magnetic base plate or handheld for quick point measurements. The 0.5 mm spring-loaded exchangeable test needle reaches fine-pitch QFP pins, BGA breakout pads, and 0402 components. Multiple ground options and color-coded cable holders keep multi-channel measurements organized. At 200 MHz bandwidth, the SQ200 captures SPI clock edges, I2C bus integrity, PWM waveforms, and UART signal quality with flat frequency response across the passband.
Watch the Sensepeek SQ200 oscilloscope probe introduction
Why GSAS for Sensepeek SQ200 in India
GSAS is Sensepeek’s authorized engineering partner in India, providing INR invoicing, evaluation units, and probe selection guidance from offices in Bengaluru, Hyderabad, Chennai, Pune, Mumbai, and Delhi NCR. Contact GSAS from Bengaluru to Delhi NCR for pricing and volume quotes.
Blog
Sensepeek Insights
Shrinking Boards, Growing Problems: Why Hands-Free Probing Is Essential as Component Density Rises
As PCBs shrink to 0201 components, QFN packages, and BGA-only processors, traditional probing methods fail. Here is why the Sensepeek PCBite hands-free system is becoming essential for modern hardware debug.
Getting Started with Sensepeek PCBite: Unboxing to First Measurement
Step-by-step tutorial for setting up a Sensepeek PCBite kit, from unboxing and base plate preparation through probe attachment, ground connection, and your first hands-free oscilloscope measurement.
High-Speed Interface Validation with Sensepeek SQG Probes: USB, HDMI, and SATA
How to use Sensepeek SQG high-frequency probes for signal integrity validation on USB, HDMI, SATA, and PCIe interfaces, probe selection by data rate, AC vs DC coupling, and ground strategy.
Related products
More from Sensepeek
All Sensepeek products →
Sensepeek SQ10 Passive 1:1 Hands-Free Probe
Passive 1:1 hands-free probe with 10 MHz bandwidth, 0.5 mm spring-loaded tip, insulated body, and magnetic PCBite mount. Buy in India from GSAS, authorized Sensepeek partner.
View Sensepeek SQ10 Passive 1:1 Hands-Free Probe →
Sensepeek SQ500 500 MHz Hands-Free Oscilloscope Probe
500 MHz passive 10:1 hands-free oscilloscope probe with 300V CAT II rating, 9 pF capacitance, insulated body, and PCBite magnetic mount. Buy in India from GSAS.
View Sensepeek SQ500 500 MHz Hands-Free Oscilloscope Probe →Interested in Sensepeek SQ200 200 MHz Hands-Free Oscilloscope Probe?
Get pricing, an evaluation unit, or a technical consultation from our application engineers.