Saleae Saleae Wire Harness with Test Clips: 16-Channel Set
Logic Analyzer AccessoriesGenuine Saleae wire harness with hook-style test clips for Logic Pro 16, four 2x4-to-clips harnesses cover channels 0–15 in matched pairs, ready for fine-pitch SMD probing without solder. Available in India through GSAS, authorized Saleae engineering partner.
Compatible Models
Saleae Logic 8, Logic Pro 8, Logic Pro 16 (4 harnesses make a complete 16-channel set for the Pro 16)
Connector (analyzer end)
Polarised 2x4 header, mates with the Saleae analyzer input port
Termination (probe end)
Hook-style test clips, colour-coded and labelled per channel
Set Contents
Four harnesses covering channels 0–3, 4–7, 8–11, 12–15 (also available individually on request)
Use Case
Fine-pitch SMD probing without solder, IC-pin-cycle debug, multi-net capture on dense boards
Country of Origin
Taiwan (HQ: South San Francisco, USA)
Saleae Part Numbers
SAL-00097 (0–3), SAL-00098 (4–7), SAL-00099 (8–11), SAL-00100 (12–15)
Warranty
Standard manufacturer warranty
Overview
About Saleae Wire Harness with Test Clips: 16-Channel Set
For Logic Pro 16 users probing fine-pitch SMD on a dense board, a wire harness with hook clips is the difference between an hour of solder-tag prep and a five-minute capture session. The Saleae set covers all 16 channels in four 4-channel harnesses, each with a 2x4 header on the analyzer end and labelled hook clips on the probe end. Most India teams order the full 4-harness set; individual channel-range harnesses are also available for spare-parts and bench-multiplier orders.
Why the set, not a single 16-channel harness
Saleae ships the 16 channels as four 4-channel harnesses so you can:
- Run a Logic 8 or Logic Pro 8 with one harness (channels 0–3 or 4–7), no wasted cable mass
- Stage two boards on adjacent benches with two harnesses each (8 channels apiece)
- Replace one damaged harness without buying a complete new set
- Hand off harnesses to colleagues without breaking the rest of your wiring
The trade-off vs a single moulded 16-channel harness is one extra 2x4 connector mate per channel group, negligible in practice.
Part-number breakdown (for procurement orders)
| Channels covered | Saleae part number |
|---|---|
| 0–3 | SAL-00097 |
| 4–7 | SAL-00098 |
| 8–11 | SAL-00099 |
| 12–15 | SAL-00100 |
GSAS can supply the complete set (recommended) or individual harnesses on quote. If your team only runs a Logic 8 or Logic Pro 8, one harness is enough; for the Logic Pro 16 with full 16-channel capture, you’ll want all four.
Compatible Saleae models
- Saleae Logic 8, one harness suffices
- Saleae Logic Pro 8, one harness suffices
- Saleae Logic Pro 16, set of four for full 16-channel probing
Pair with the Saleae Logic to Wires Cable (flying leads) for breadboard / through-hole probing, or the Saleae 2x4 Header Cable for board-mounted debug headers. Most India bench setups carry one of each, plus a spare wire-harness in storage for the day a clip jaw breaks mid-session.
Buy in India through GSAS
GSAS is Saleae’s authorized India engineering partner. We supply the full Saleae wire harness range on quote with GST invoicing, GeM / SAP Ariba / Coupa / TReDS procurement routing, and engineering support across Bengaluru, Hyderabad, Chennai, Pune, Mumbai, and Delhi NCR.
Request a Quote for the complete set or individual channel-range harnesses, or Contact GSAS for design-review support on debug-header placement and probe access during PCB layout.
Blog
Saleae Insights
Best Logic Analyzer in India (2026): A Vendor-Neutral Buying Guide for Embedded Teams
Channels, sample rate, protocol decode, and streaming vs buffer, a vendor-neutral buying framework for choosing a USB logic analyzer or protocol analyzer in India, funnelling to the SKUs that actually fit your bus.
AI Data Centers in India: Test, Measurement & Memory Boom
AI is a hardware supercycle. Every AI rack has to be designed, brought up, powered, fed with memory, and kept alive, and each of those is a test, measurement and memory problem. Here is the full engineering toolchain behind the AI data center, mapped to what Indian teams can buy today through GSAS.
Logic Analyzer vs Oscilloscope vs MSO: When You Actually Need Analog Channels (Saleae Logic MSO)
A decision tree for Indian embedded teams: logic analyzer, oscilloscope, or mixed-signal oscilloscope? A channel-count heuristic, the three questions that actually decide it, and when 4 real analog channels in a Saleae Logic MSO beat buying a separate benchtop scope plus a separate logic analyzer.
Related products
More from Saleae
All Saleae products →
Saleae Logic to Wires Cable (Flying Leads)
Genuine Saleae flying-leads cable for Logic 8, Logic Pro 8, and Logic Pro 16-2x4 header on one end, individual labelled flying leads on the other for direct wire-wrap, breadboard, or solder-tag connections. Available in India through GSAS, authorized Saleae engineering partner.
View Saleae Logic to Wires Cable (Flying Leads) →
Saleae Logic 2x4 Header Cable (Gen 2)
Genuine Saleae 2x4 header cable for Logic 8, Logic Pro 8, and Logic Pro 16, both ends terminated in the 2x4 polarised header so you can mate directly to a board-mounted Saleae debug header without flying leads. Available in India through GSAS, authorized Saleae engineering partner.
View Saleae Logic 2x4 Header Cable (Gen 2) →Interested in Saleae Wire Harness with Test Clips: 16-Channel Set?
Get pricing, an evaluation unit, or a technical consultation from our application engineers.