Saleae Saleae Logic to Wires Cable (Flying Leads)
Logic Analyzer AccessoriesGenuine Saleae flying-leads cable for Logic 8, Logic Pro 8, and Logic Pro 16-2x4 header on one end, individual labelled flying leads on the other for direct wire-wrap, breadboard, or solder-tag connections. Available in India through GSAS, authorized Saleae engineering partner.
Compatible Models
Saleae Logic 8, Logic Pro 8, Logic Pro 16 (every model that uses the Saleae 2x4 input header)
Connector (analyzer end)
2x4 polarised header, mates with the Saleae analyzer's input port
Termination (probe end)
Individual flying leads, colour-coded and labelled per channel + GND
Channels per cable
8 (covers a full Logic 8 / Pro 8, or one half of a Logic Pro 16)
Country of Origin
Taiwan (HQ: South San Francisco, USA)
Use Case
Direct probing of through-hole pads, breadboards, wire-wrap rails, and solder-tag joints, pair with separate test clips when probing fine-pitch SMD
Saleae Part Number
SAL-00118
Warranty
Standard manufacturer warranty
Overview
About Saleae Logic to Wires Cable (Flying Leads)
The Saleae Logic-to-Wires Cable is the right starting accessory for any team that probes wire-wrap rails, breadboards, through-hole pads, or solder tags. A polarised 2x4 header connects to the Logic 8 / Logic Pro 8 / Logic Pro 16’s input port; eight individual flying leads with labelled colour-coded sleeves connect to your circuit. Every Saleae logic analyzer ships with one cable in the box, but a second cable is the standard order for any team that runs more than one bench rig, leaves a cable connected to a permanent test fixture, or wants a known-good spare to rule out cable damage during debug.
What this cable replaces in your workflow
If you have ever:
-
Cut and re-soldered cable lugs because the original cable’s leads weren’t long enough to reach
-
Run out of cables because the only one in the office is on a colleague’s bench
-
Lost an afternoon to an intermittent signal that turned out to be a damaged cable, not the DUT
-
a second flying-leads cable is the cheapest fix. Saleae’s labelling matches Logic 2’s channel display, so a cable swap is plug-and-play.
Compatible Saleae models
This cable is the standard accessory for the Saleae logic analyzer line:
- Saleae Logic 8, entry-tier USB analyzer
- Saleae Logic Pro 8, 500 MS/s 8-channel mixed-signal
- Saleae Logic Pro 16, flagship 16-channel mixed-signal (use two cables for full 16-channel probing)
The Saleae Logic MSO line (2×100, 4×100, 4×200) uses its own purpose-built digital probes and analog scope probes, see those product pages for accessory details.
Buy in India through GSAS
GSAS is Saleae’s authorized India engineering partner. We supply genuine Saleae accessories on quote with GST invoicing, GeM / SAP Ariba / Coupa / TReDS procurement routing, and engineering support across Bengaluru, Hyderabad, Chennai, Pune, Mumbai, and Delhi NCR.
Request a Quote for current pricing and lead time, or Contact GSAS if you also need a fresh Logic analyzer or a wire harness with test clips for fine-pitch SMD probing, see Saleae Wire Harness, Test Clips Set and the Saleae 2x4 Header Cable.
Blog
Saleae Insights
Best Logic Analyzer in India (2026): A Vendor-Neutral Buying Guide for Embedded Teams
Channels, sample rate, protocol decode, and streaming vs buffer, a vendor-neutral buying framework for choosing a USB logic analyzer or protocol analyzer in India, funnelling to the SKUs that actually fit your bus.
AI Data Centers in India: Test, Measurement & Memory Boom
AI is a hardware supercycle. Every AI rack has to be designed, brought up, powered, fed with memory, and kept alive, and each of those is a test, measurement and memory problem. Here is the full engineering toolchain behind the AI data center, mapped to what Indian teams can buy today through GSAS.
Logic Analyzer vs Oscilloscope vs MSO: When You Actually Need Analog Channels (Saleae Logic MSO)
A decision tree for Indian embedded teams: logic analyzer, oscilloscope, or mixed-signal oscilloscope? A channel-count heuristic, the three questions that actually decide it, and when 4 real analog channels in a Saleae Logic MSO beat buying a separate benchtop scope plus a separate logic analyzer.
Related products
More from Saleae
All Saleae products →
Saleae Wire Harness with Test Clips: 16-Channel Set
Genuine Saleae wire harness with hook-style test clips for Logic Pro 16, four 2x4-to-clips harnesses cover channels 0–15 in matched pairs, ready for fine-pitch SMD probing without solder. Available in India through GSAS, authorized Saleae engineering partner.
View Saleae Wire Harness with Test Clips: 16-Channel Set →
Saleae Logic 2x4 Header Cable (Gen 2)
Genuine Saleae 2x4 header cable for Logic 8, Logic Pro 8, and Logic Pro 16, both ends terminated in the 2x4 polarised header so you can mate directly to a board-mounted Saleae debug header without flying leads. Available in India through GSAS, authorized Saleae engineering partner.
View Saleae Logic 2x4 Header Cable (Gen 2) →Interested in Saleae Logic to Wires Cable (Flying Leads)?
Get pricing, an evaluation unit, or a technical consultation from our application engineers.