Skip to main content

Capabilities · Single-Board Computers

The right board on your bench, and a team to take it to production.

Digilent FPGA boards, Arm MPS prototyping platforms, AutoPi telematics units and boards GSAS designs in India. Supplied with INR invoicing, then brought up, programmed and turned into your own hardware.

Find a boardWhat we offer
  1. 01 What we offer
  2. 02 Prototype to product
  3. 04 How to start
01 What we offer

Four kinds of board, and the engineering around them.

Each card lights its place on the bench, ending at the custom PCB your prototype turns into.

An engineering bench with the six single-board computer offers numbered as on the cards FPGA Arm GSAS 1. FPGA dev board: Digilent 1 2. Arm MPS platform: Pre-silicon Arm IP evaluation 2 3. Telematics unit: AutoPi on the vehicle 3 4. GSAS board: Genesis Cortex-M4 Bridge 4 5. Firmware bench: Bring-up, BSP, firmware 5 6. Your custom PCB: The production board 6
  • 1. FPGA dev board: Digilent
  • 2. Arm MPS platform: Pre-silicon Arm IP evaluation
  • 3. Telematics unit: AutoPi on the vehicle
  • 4. GSAS board: Genesis Cortex-M4 Bridge
  • 5. Firmware bench: Bring-up, BSP, firmware
  • 6. Your custom PCB: The production board
Hover, tap or focus a number or a card. The dashed board is yours, once the prototype works.

  1. FPGA development boards

    AMD FPGA and Zynq boards from Digilent, from first RTL to embedded Linux.

    • Basys 3 and Nexys A7 for digital design
    • Arty A7 and S7 (Artix-7, Spartan-7), Cmod A7
    • Arty Z7, Zybo Z7 and Eclypse Z7 for Zynq-7000

    Digilent boards supplied with INR invoicing

  2. Arm MPS prototyping platforms

    Reference FPGA platforms for evaluating Arm IP before silicon.

    • MPS2+ for Cortex-M prototyping
    • MPS3 for Cortex-M, Cortex-A and Cortex-R
    • MPS4 for Arm Corstone subsystems

    MPS2+, MPS3 and MPS4 from GSAS

  3. Telematics single-board computers

    AutoPi units for vehicles and fleets: the CM4-based TMU CM4 and CAN-FD Pro, and the plug-in Mini.

    • TMU CM4 with dual CAN-FD and 4G LTE
    • CAN-FD Pro data logger
    • Plug-in Mini for OBD-II and EV data

    AutoPi TMU CM4, CAN-FD Pro and Mini

  4. Boards GSAS designs

    Development boards designed by GSAS in India.

    • Genesis Cortex-M4 Bridge (STM32F407)
    • LPC 1768 Cortex-M3 board
    • LPC 2929 ARM9 board

    Designed and assembled in India

  5. Bring-up and firmware

    Engineering that gets the board you picked doing your job.

    • Board selection for your MCU and feature set
    • Peripheral integration and BSP work
    • Firmware on Keil MDK or Arm Development Studio

    Engineering support from Indian offices

  6. From dev board to custom PCB

    When the prototype works, GSAS moves it onto your own hardware.

    • Power measurement and battery-life checks
    • Schematic and layout for the production board
    • Build and board-level test in Bengaluru

    Hardware design and PCB engineering

02 Prototype to product

A dev board is where a product starts, not where it ends.

The same team selects the board, brings it up, proves the design on the bench, and then designs the production hardware it becomes.

Dev board 01 Select 02 Bring up 03 Validate 04 Custom hardware Your board
From a development board to your own production board, in four stages: select, bring up, validate, custom hardware.

  1. 01

    Select

    Silicon
    MCU, MPU or FPGA for the job
    Board
    dev board, MPS or SBC
    Buying
    INR invoice, GeM, SAP Ariba

    One supplier for board, tools and support

  2. 02

    Bring up

    Peripherals
    sensors, radios, displays
    Software
    BSP, drivers, Linux image
    Debug
    Keil MDK, Development Studio

    Firmware written on your target

  3. 03

    Validate

    Function
    against your specification
    Power
    measurement, battery life
    Field
    telemetry, OTA strategy

    Proven on the bench before money goes into hardware

  4. 04

    Custom hardware

    Design
    schematic and multilayer layout
    Build
    assembly and board test
    Handoff
    production documentation

    Same team, same firmware, your own board

Buying through GSAS

One supplier for the board, the tool chain and the engineering, invoiced in INR, with offices across India.

  • INR invoicing
  • GeM
  • SAP Ariba
  • Coupa
  • TReDS
  • ISO 9001:2015
03 The boards

Platforms you can order today.

A selection from the catalogue, from a first FPGA board to pre-silicon Arm platforms and vehicle telematics.

Digilent FPGA development boards in the catalogue
12
Arm MPS prototyping platforms
3
AutoPi telematics units
3
Invoicing, with engineering support in India
INR

Partners: Digilent · Arm · AutoPi · GSAS products

04 Working together

Three ways teams start with a board from GSAS.

Building a product, evaluating Arm IP before silicon, or putting computers on vehicles.

  1. 01

    Product teams

    Prototype now, production next

    Pick the board, bring it up and prove the idea, then move it onto a custom PCB without changing teams. GSAS carries the firmware across to the production board.

    • Board and tool-chain selection
    • Bring-up and firmware
    • Custom PCB when it works
    Plan a prototype

  2. 02

    Silicon and IP teams

    Before tape-out

    Arm MPS platforms let a design centre run Arm processor IP and Corstone subsystems on an FPGA before silicon, with the debug tool chain to match.

    • MPS2+, MPS3 and MPS4
    • Keil MDK and Arm Development Studio
    • ULINK debug probes
    Ask about MPS

  3. 03

    Fleet and EV telematics

    On the vehicle

    AutoPi units read CAN and OBD-II data and report over 4G to a fleet platform; the CM4-based units also run your own code at the edge in Docker. GSAS supplies them in India and helps with the integration.

    • TMU CM4, CAN-FD Pro and Mini
    • Custom Linux images and OTA strategy
    • Cloud and fleet-platform integration
    Discuss a fleet
05 Contact

Need a board, or the product it becomes?

Tell us the silicon, the interfaces and what the product has to do. GSAS replies with the board, the tool chain and a quote, and the engineering to take it further.

Request a quote All capabilities

sales@gsasindia.com +91 80 6590 1783

Questions

Single-board computers and development boards from GSAS in India

Which development boards and single-board computers can I buy from GSAS in India?

Digilent FPGA development boards (Arty A7, S7 and Z7, Cmod A7, Zybo Z7, Nexys A7, Genesys 2, Eclypse Z7 and more), Arm MPS2+, MPS3 and MPS4 prototyping platforms, AutoPi telematics units (TMU CM4, CAN-FD Pro and Mini), and boards GSAS designs itself, such as the Genesis Cortex-M4 Bridge and the LPC 1768 board.

Can GSAS help us choose the right board?

Yes. Tell us the MCU, MPU or FPGA you are targeting and the peripherals and interfaces the product needs, and GSAS engineers will suggest the board and the tool chain to go with it.

What is an Arm MPS platform used for?

Arm MPS boards are FPGA prototyping platforms for evaluating Arm processor IP and subsystems before silicon. MPS2+ targets Cortex-M, MPS3 covers Cortex-M, Cortex-A and Cortex-R, and MPS4 is built for Arm Corstone subsystems.

What is the AutoPi TMU CM4?

A vehicle telematics unit built on the Raspberry Pi Compute Module 4, with dual CAN-FD, OBD-II, 4G LTE and Docker-based edge computing, managed through AutoPi Cloud. GSAS supplies it in India along with the CAN-FD Pro data logger and the AutoPi Mini.

Can GSAS turn our dev-board prototype into a custom PCB?

Yes. Once the prototype works, GSAS designs the production board (schematic and multilayer layout), builds and tests it in Bengaluru, and carries the firmware across. See the hardware design page for the full service.

How do we buy from GSAS?

Request a quote and GSAS invoices in INR. GSAS is registered on GeM and works through SAP Ariba and Coupa for organisations that buy that way, with engineering support from its Indian offices.