In short
Siemens' edition checklist shows different entries for Xpedition Advanced and Xpedition Enterprise on 22 of its 54 rows, and on 20 of them Enterprise goes further, including concurrent team layout, managed design reuse, on-prem storage with advanced security, release management, multi-board system design, and FPGA/PCB, IC/package/board and RF co-design. On the other two, basic signal integrity simulation and core DFM checks, the checklist reads 'included' for Advanced and 'option' for Enterprise, so on that checklist Enterprise is not a strict superset of Advanced.
As of November 2026, Siemens’ public edition checklist shows different entries for Xpedition Advanced and Xpedition Enterprise on 22 of its 54 rows. On 20 of them Enterprise goes further, with concurrent team layout, managed design reuse, on-prem storage with advanced security, release management and six multi-domain rows among them. On the other two, basic signal integrity simulation and core DFM checks, Advanced reads “included” and Enterprise reads “option”. On Siemens’ checklist, Enterprise is therefore not a strict superset of Advanced.
Siemens introduced Xpedition Advanced with the Xpedition 2610 release, announced on 26 October 2026. Every product statement below comes from Siemens’ edition checklist, Advanced fact sheet, product pages, buyer’s guide and Getting Started guide for Advanced, all linked under References. The counts are ours. The full checklist is on our Xpedition family page, and each edition has its own page: Xpedition Advanced and Xpedition Enterprise.
How Siemens draws the line
Siemens’ product page says Advanced is designed for growing engineering teams and individual engineers, and suits teams developing high-speed, high-density or rigid-flex boards “without requiring full enterprise infrastructure”. Its Enterprise page describes that edition as “Enterprise PCB design & analysis for global teams managing complex, multi-domain designs.”
The Advanced fact sheet says what that infrastructure is. Enterprise “builds on those same design capabilities with broader organizational infrastructure for larger or more distributed environments, including managed design and library data, release and process governance, layout concurrency, and deeper enterprise integration”. For an existing Enterprise customer it adds: “For organizations already relying on those broader enterprise capabilities, Xpedition Enterprise remains the appropriate solution.”
The checklist turns those sentences into rows.
The 20 rows where Enterprise goes further
The table lists every row where the Enterprise column shows more than the Advanced column, in Siemens’ groups and order, with Siemens’ row names. Core, Extended, Option and None are Siemens’ words. “Included” stands for a tick and “Not listed” for an empty cell.
| Siemens’ group | Capability (checklist row) | Xpedition Advanced | Xpedition Enterprise |
|---|---|---|---|
| Component and supply chain management | Component sourcing insights - library | Not listed | Included |
| Component and supply chain management | Part request system | Not listed | Included |
| Component and supply chain management | Component supply chain management in library | Not listed | Included |
| Layout design | Concurrent team design - layout | Not listed | Included |
| Layout design | Bond wires, embedded active/passives | Not listed | Included |
| Design and library data management | Library management | Core | Extended |
| Design and library data management | Design version management and editing | Core | Extended |
| Design and library data management | Design review, compare and markup | Core | Extended |
| Design and library data management | Managed design reuse - schematic, layout and constraints | Not listed | Included |
| Design and library data management | On-prem storage with advanced security | Not listed | Included |
| Design and library data management | Release management | Not listed | Included |
| Multi-domain collaboration | Multi-board system design | Not listed | Included |
| Multi-domain collaboration | FPGA/PCB co-design | Not listed | Included |
| Multi-domain collaboration | IC/package/board co-design | Not listed | Included |
| Multi-domain collaboration | Electronic/electrical co-design | Not listed | Included |
| Multi-domain collaboration | Model-based engineering | Not listed | Included |
| Multi-domain collaboration | RF co-design | Not listed | Included |
| MFG verification / documentation (Powered by Valor) | Manufacturing output automation | Core | Extended |
| MFG verification / documentation (Powered by Valor) | Integrated DFM checks in layout | Not listed | Included |
| Performance analysis and verification (Powered by HyperLynx) | Analog / mixed-signal simulation | None | Option |
Four notes on these rows:
- Layout concurrency. In Advanced, concurrency is on the schematic. Per Siemens’ product page, up to two schematic users can work at the same time, on different sheets (and constraints), plus a third user in Layout through flow concurrency. See concurrent schematic design in Xpedition Advanced.
- Data management. The checklist does not define what Extended adds over Core, so ask for that detail against your own process. The buyer’s guide names Xpedition EDM as the “Fully-featured on-premises data management solution for Xpedition Enterprise”.
- DFM. Advanced includes Valor-powered core DFM checks (DFF, DFA) through the cloud application PCBflow, which Siemens’ Getting Started guide lists with the Advanced licence. Checks integrated in layout are an Enterprise row. Valor NPI is a separate product and is not included with Advanced.
- Analog/mixed-signal simulation. The row above sits in Siemens’ HyperLynx group and is an Enterprise option. Per the fact sheet, Advanced includes analog/mixed-signal simulation “enabled by PartQuest Explore”, which the Getting Started guide lists as a browser-based cloud application.
Two rows that go the other way
Two rows read “included” for Advanced and “option” for Enterprise:
| Capability (checklist row) | PADS Pro Essentials | Xpedition Standard | Xpedition Advanced | Xpedition Enterprise |
|---|---|---|---|---|
| DFM checks (DFF, DFA) core | Included | Included | Included | Option |
| Signal integrity simulation - basic | None | Add-on | Included | Option |
In this table every entry is Siemens’ own cell text. Core DFM checks are included in the first three editions and are an option in Enterprise. Basic signal integrity simulation, powered by HyperLynx, reads “included” in the Advanced column alone. The checklist gives no reason for either entry, and we will not supply one. If you move from Advanced to Enterprise, name both items in your quote request so that nobody assumes them.
What the two editions share
The other 32 rows carry the same entry for both editions. The schematic design group is identical, including extended constraints, table-based design and concurrent team design on the schematic. The concurrency tick is the same in both columns; Siemens’ product page puts Advanced at up to two schematic users at the same time, as noted above. In layout, both have extended constraints, extended automated routing, sketch planning and rigid-flex design. Both include panelization and advanced ECAD-MCAD co-design. Full signal integrity simulation, power integrity simulation, electrical rule checks, schematic analysis and PLM integration are options in both.
So an engineer who needs extended design constraints, extended automated routing or rigid-flex design gets the same checklist entry in either edition. Most rows that separate the two concern teams, managed data and other design domains.
Licensing, deployment and where data lives
Siemens’ buyer’s guide also separates the two on licensing and deployment.
- Advanced is a named-user subscription. Siemens defines that as access assigned “to individuals rather than shared machines”. The guide describes a full desktop authoring environment with cloud-connected workflows for sharing and review, which can work online or offline.
- Enterprise uses floating/enterprise licensing. The guide lists “Centralized floating/enterprise licensing and user administration” and “Integration with enterprise IT policies and security frameworks”. It says Enterprise “is delivered through a guided engagement”.
Data location needs its own check in India. “On-prem storage with advanced security” is an Enterprise-only row. For Advanced, the Getting Started guide says the administrator selects the region where the cloud account stores data: United States (N. Virginia), Europe (Frankfurt) or Asia Pacific (Japan). The region cannot be changed once selected, and the list has no India region. Under data management, the buyer’s guide also says, without naming an edition, “Store and manage your component/library and design data using your own systems or local storage”. Siemens’ public material does not state exactly which data is held in the cloud region, so confirm it for your configuration before purchase.
Read the fit table as a description of the buyer
The buyer’s guide sums up fit in one line per edition. Advanced: “Best for growing teams that need schematic user concurrency, advanced capabilities and automation for high speed, complex designs, and collaboration”. Enterprise: “Best for large or distributed organizations requiring multi-user concurrency, formal processes, and audit-ready governance”.
Those lines summarise a fit table that asks you to pick, row by row, the column that most closely describes your situation. It describes buyers. Its Advanced column mentions defined team workflows. Its Enterprise column mentions program-level governance and audit trails. For what an edition contains, use the checklist, where library management is Core in Advanced and release management is an Enterprise-only row.
Stay on Advanced or move to Enterprise
Stay on Advanced when:
- One layout designer per board is enough, and two engineers sharing the schematic covers your load.
- Core library management, version management and design review fit your process.
- Your policy does not require on-prem storage with advanced security, and you have confirmed what your configuration stores and where.
- Your PCB tool does not have to carry multi-board system design, or FPGA/PCB, IC/package/board or RF co-design.
Move to Enterprise when you need any of these rows, which Siemens lists for Enterprise only:
- Concurrent team layout.
- Managed design reuse across schematic, layout and constraints.
- On-prem storage with advanced security.
- Release management.
- Multi-board system design.
- FPGA/PCB, IC/package/board or RF co-design.
- Model-based engineering.
- Integrated DFM checks in layout.
If you already run Enterprise and are asked whether Advanced is enough, check the 20-row table above against your current process. One row you depend on settles it.
Moving up later is supported: the buyer’s guide says “All products are upward compatible including compatibility with Xpedition Enterprise.” The Siemens sources we used say nothing about moving designs from Enterprise to Advanced, so ask before you plan a mixed installation or a move down.
Buying in India
GSAS Micro Systems is an authorized Siemens EDA partner in India. We supply Xpedition Standard with token-based add-ons, Xpedition Advanced, Xpedition Advanced DS (Siemens’ schematic-only companion seat to Advanced) and Xpedition Enterprise. Siemens’ product pages offer Advanced and Enterprise by quote, and we publish no prices for them: GSAS quotes in INR with a GST invoice.
Send us the rows your process depends on and we will work through the choice with you. GSAS has offices in cities including Bengaluru, Hyderabad, Chennai, Pune, Mumbai and Delhi NCR. Request a quote or book a demo. If your question sits one tier lower, read Xpedition Standard vs Xpedition Advanced, or start with the four-edition chooser.
References
- Siemens: Xpedition product family, section “Choose the right PCB design solution for you” (the 54-row edition checklist)
- Siemens: Xpedition Advanced fact sheet (section “Xpedition Advanced and Xpedition Enterprise”)
- Siemens: Xpedition Advanced (product page and FAQ)
- Siemens: Xpedition Enterprise (product page)
- Siemens: Xpedition buyer’s guide (deployment, data management, purchase options, fit table and FAQs)
- Siemens: Getting Started guide for Xpedition Advanced (storage regions, cloud applications included with the licence)
- Siemens EDA blog: What’s new in Xpedition 2610 (26 October 2026, introduces Xpedition Advanced)
Also appears in:
Interested in Siemens EDA tools?
Talk to our application engineers for personalized tool recommendations.
More from Siemens EDA
View all →