electronica India 2026
Thank you for stopping by Stall H3.I45 and H3.I47 at BIEC, Bengaluru. Here is the stand on film, so you can pick up where we left off.
From the GSAS team
Thank you for the time you spent with us in Hall 3. The questions at the demo benches and the conversations with our partner teams are why we come to the show.
If the stand was busy when you came by, or you ran out of time before you saw everything, the demos are below, filmed on the show floor. And if one of them is close to a problem you are working on, the engineer who ran it is one message away.
The GSAS team, Bengaluru
Three days in under a minute
A quick look at the GSAS stands and both launches, then the rest of the films below.
Impressions from the booth
Pradyun Kamath holds up the Cortex-M4 Bridge, the first board in the GSAS Genesis Series: an STM32F407 Discovery board on a GSAS carrier with a TFT display, keypad, 7-segment display, LEDs, relay, buzzer and CAN. Then a game of Reflex Roulette runs on it.
Pradyun Kamath, Field Applications Engineer, GSAS
ProT Ar-Ge Partner on camera
Çiler Çavuşoğlu of ProT Ar-Ge opens the FADOS XVI launch as a crowd gathers at Stall H3.I47. Surag A of GSAS then shows what the new tester adds: milliohm measurement, a short locator and a frequency sweep, with the FADOS 9F1 and MUX functions in one unit.
Çiler Çavuşoğlu, Director, ProT Ar-Ge, and Surag A, FADOS Product Champion, GSAS
Arm Partner on camera
Andreas Steffen of Arm opens at the GSAS stand. Geetha Sathyanarayana Nazre of GSAS then explains when to pick Keil MDK for Cortex-M and Arm Development Studio for Cortex-A and Cortex-R, and what Keil MDK v6 adds: AI support, Keil Studio in VS Code and built-in CI/CD.
Andreas Steffen, Arm, and Geetha Sathyanarayana Nazre, GSAS
Pico Technology Partner on camera
Hari Ram, Country Head of Pico Technology, talks in front of the Pico wall about the newly launched PicoScope 3000 Series, the wider range including vector network analyzers, and why electronica draws engineers from every industry.
Hari Ram, Country Head, Pico Technology
GW Instek Partner on camera
Fred Chen, General Manager of GW Instek, talks about the partnership with GSAS. Dilip Kempegowda of GSAS then introduces the BMS Test and Validation System on the stand, an end-of-line test setup built on a GW Instek DAQ-9600 and a PSW power supply.
Fred Chen, General Manager, GW Instek, and Dilip Kempegowda, Senior FAE, GSAS
Elsyca Partner on camera
Reshmaa Selvakumar of Elsyca, which makes PCB plating software, explains why the company came to the show: to understand the Indian market, and to see how its partnership with GSAS works on the ground for PCB fabricators.
Reshmaa Selvakumar, Business Developer, Elsyca
ProMik Partner on camera
Andreas Hahn of ProMik introduces the range at the GSAS stand, from flash programming through in-circuit, functional and end-of-line test, pointing to each on the ProMik poster. A short cutaway shows a laptop and a test fixture on the bench.
Andreas Hahn, Key Account Manager, ProMik
Microtest Partner on camera
Arun Jose S of Microtest points out the transformer test station on the stand. A test is programmed once, then checks inductance, DC resistance and other parameters across every pin. He also covers the hipot, impulse winding and cable harness testers.
Arun Jose S, Business Development, Microtest
Demos from the benches
Soumya and Narayan run through the SEGGER range at the bench: J-Link and J-Trace PRO probes, an emPower board running a graphics app on embOS, one press of Flasher Portable PLUS programming a GSAS board, and a mini ATE with Engineer Console on Flasher Hub-4.
Soumya and Narayan, GSAS
Pradyun Kamath explains a face-detection model running entirely on an Alif Ensemble E7: the Cortex-M55 handles control and the Ethos-U55 NPU runs inference in 3.42 ms, with no host PC. The board raises a caution when you move out of frame.
Pradyun Kamath, Field Applications Engineer, GSAS
Harshitha H speaks into a microphone and an FPGA board plays her voice back, modulated. Then a visitor steps up to the AMD Kria KV260 vision demo, which detects and counts faces in its camera view of the hall.
Harshitha H, Field Applications Engineer, GSAS
Narayan Prabhu shows the newly launched Joulescope JS320, wired to a live target board. The Joulescope software shows current, voltage, power, charge and energy next to the waveforms, on one instrument that spans nanoamps to 3 A.
Narayan Prabhu, Field Application Engineer, GSAS
A Binho Supernova drives a Microchip I3C target while a Saleae logic analyzer listens on the bus through hands-free PCBite probes. Narayan Prabhu then shows the Saleae Logic and Supernova software decoding the same traffic side by side.
Narayan Prabhu, Field Application Engineer, GSAS
Irfana Tabassum and Soumyarani R Pise of GSAS explain static analysis with Perforce QAC and Klocwork against MISRA, dynamic testing with TESSY, and work toward ISO 26262 and IEC 61508. They also describe Perforce's AI-assisted fixes in VS Code.
Irfana Tabassum, Senior Manager, Business Development, and Soumyarani R Pise, Technical Support Engineer, GSAS
Sampath R walks through the Siemens board flow at the Siemens EDA wall: Xpedition for schematic and layout, HyperLynx for signal, power and thermal checks, and Valor for DFM. Then Questa, Calibre and Tessent for IC and FPGA work.
Sampath R, Application Engineer, EDA, GSAS
What next
All 16 films from electronica India 2026, plus the look back at earlier shows, with links to every product on camera.
