Embedded Perspectives
Microtest
25 articles tagged with Microtest.
Power Measurement for Server PSUs: Microtest 7140 Power Analyzer
Server power supplies must meet efficiency standards from full load down to standby. The Microtest 7140 measures power from 0.001 W standby to 16 kW full load in a single instrument.
Wireless Charger QC Testing with the Microtest 9901
Wireless charger production requires protocol verification, FOD compliance testing, and statistical quality control. The Microtest 9901 automates the full test sequence for PD, QC, and DC-DC power products up to 150 W.
Motor Stator Testing in EV Manufacturing: Microtest MT-6910 Series
A motor stator is the stationary assembly that generates the rotating magnetic field, the part that makes the motor work.
PCB Incoming Inspection with Multichannel LCR Testing
A populated PCB might carry fifty or more passive components, inductors, capacitors, resistors, each specified to tolerances that the assembled circui...
Hipot Testing for Indian Manufacturers: Microtest 7630/7631 Series
Dielectric withstand and insulation resistance testing is mandatory for safety compliance. The Microtest 7630 and 7631 hipot testers scale from 2-channel bench testing to 72-channel production automation.
Impulse Winding Testing for Motor and Transformer Manufacturers
Hipot testing catches gross insulation failures. Impulse winding testing catches shorted turns, the defect class that hipot misses but that causes motors and transformers to fail in the field.
Microtest 4-Wire Cable Harness Tester: Why Kelvin Measurement Matters for Production Quality
A technical deep dive into the Microtest 4-wire cable harness tester, Kelvin resistance measurement, hipot testing, wiring correctness verification, and production integration for Indian automotive and aerospace harness manufacturers.
Microtest 6370 LCR Meter: Precision Component Measurement for Indian Labs and Production Lines
A technical deep dive into the Microtest 6370 LCR meter, 0.05% accuracy, 20 Hz to 5 MHz, bin sorting, and handler interfaces for component characterization and production inspection in India.
Microtest 6632 Impedance Analyzer: From Component QC to Material Characterisation
An impedance analyzer does everything an LCR meter does, and then goes further.
Microtest 6632+ vs 6350+ DC Bias Systems: Which One Fits Your Lab?
Both the Microtest 6632+ and 6350+ measure inductor saturation under DC bias, but they start from different instruments with different frequency ranges and cost profiles. Here is how to choose between them.
Temperature Rise Current (Irms) Testing for EV Power Inductors
Irms, the current that causes a specified temperature rise in an inductor, sets the thermal operating limit distinct from magnetic saturation. For EV power electronics, both limits matter.
DC Bias Current Testing for AI Server Power Inductors
A single AI server rack can draw 40 kW or more. The power delivery network converting 48 V bus power down to the sub-1 V rails that feed GPU and acceler...
Setting Up Incoming Inspection for Passive Components: A Practical Guide for Indian Manufacturers
How to establish an effective incoming inspection process for resistors, capacitors, and inductors using LCR meters, sample plans, test frequencies, acceptance criteria, and SPC trending for Indian electronics manufacturing.
How to Measure Inductor Saturation Current (Isat) with DC Bias Testing
Isat, the current at which inductance drops significantly, is the defining parameter for power inductor selection. Here is how DC bias current testing captures saturation curves and what the data tells you.
Production-Line Transformer Testing: Automating Turns Ratio, Inductance, and Hipot in a Single Station
Transformer manufacturing in India is a high-volume, quality-critical industry.
USB-C Cable Qualification Testing: What Manufacturers Need to Verify Before Shipping
A guide to USB-C cable testing requirements, CC resistance, e-marker verification, power delivery compliance, and signal integrity checks that Indian cable manufacturers must perform to meet USB-IF specifications.
2-Wire vs. 4-Wire Cable Harness Testing: Which Method Does Your Production Line Need?
A practical comparison of 2-wire and 4-wire cable harness testing methods, measurement accuracy, test speed, cost, and when each approach is the right choice for Indian harness manufacturers.
LCR Meter vs. Impedance Analyzer: Which Instrument Does Your Application Need?
A practical comparison of LCR meters and impedance analyzers, measurement capability, frequency range, applications, and how to choose the right instrument for passive component testing, magnetics design, and material characterisation.
Automotive Cable Harness Testing in India: Meeting OEM Quality Requirements
India is one of the world's largest automotive markets, and the domestic wiring harness industry supplies millions of harness assemblies annually to pas...
EV Battery Harness Testing: Why High-Voltage Cable Assemblies Need a Different Approach
How India's growing EV industry creates new cable harness testing requirements, high-voltage hipot, milliohm crimp verification, shielding continuity, and safety interlock testing for battery and drivetrain harnesses.
Quality Standards Driving Test Instrument Adoption in Indian Electronics Manufacturing
How ISO 9001, IATF 16949, IEC safety standards, and OEM supplier requirements are driving Indian manufacturers to upgrade their test and measurement capabilities, from LCR meters to cable harness testers to hipot systems.
Test Automation in Indian Manufacturing: Moving from Manual Measurement to Automated Test Stations
How Indian manufacturers are transitioning from manual bench measurement to automated test systems, the business case, integration architecture, and practical steps for automating LCR, cable, and transformer testing.
Cable Harness Testing in Indian Manufacturing: 2-Wire vs 4-Wire Methods
India's cable and wiring harness industry is one of the largest in the world, supplying automotive OEMs, aerospace integrators, industrial equipment man...
Transformer Testing for Power Electronics: Impulse Winding Analysis
Transformers and inductors are the magnetic heart of every power converter.
Understanding LCR Meter Specifications for Component Testing
Every passive component that enters an electronics assembly, every capacitor, inductor, and resistor, has an impedance that varies with frequency, tem...
Explore more topics