Upcoming Events & Webinars

Siemens EDA: What's New in HyperLynx 2610

Siemens EDA's Expert Series deep dive into HyperLynx 2610: SerDes modeling, DDR5 CUDIMMs, PDN time domain analysis and parallel DSE, shared by GSAS for Indian SI and PI teams.

Online, free live webinar, 9:30 PM IST · Sajeda Tamimi (HyperLynx Product Marketing Manager, Siemens EDA) and Kirk Fabbri (Technical Marketing Manager, Simulation and Verification, Siemens EDA)

Are Traditional Methods and Tools for Safety and Security Sufficient for the AIDLC of the Future?

Perforce's Steve Howard on the AI Development Lifecycle and what it does to safety, security and compliance practice: standards evolution, where AI helps, and where its limits sit.

Online, live webinar (EMEA and North America broadcasts) · Steve Howard (Director of Product, Perforce Software)

Siemens EDA: Master PartQuest for Faster PCB Designs in Xpedition

Siemens EDA's Expert Series webinar on integrating PartQuest component data and CAD models into Xpedition libraries and designs, shared by GSAS for Indian PCB design teams.

Online, free live webinar, 9:30 PM IST · Gary Lameris (Siemens EDA) and Juan Armas (Support Application Engineer, Siemens EDA)

Predict Copper Distribution Before You Plate

A 45 minute Elsyca webinar on predicting copper plating outcomes with Elsyca PCBStudio: panel-level thickness distribution before production, automated copper balancing, and plating risks that standard DFM tools do not show.

Online live webinar on Microsoft Teams, 7:30 PM IST · Reshmaa Selvakumar (Business Developer - PCB, Elsyca) and Negin Madelat (CAE Project Engineer, Elsyca)

Siemens EDA: Introduction to EDM Data Modeling

Siemens EDA's Expert Series webinar introducing EDM Data Modeling fundamentals, objects, definitions and relationships, shared by GSAS for Indian PCB design teams.

Online, free live webinar, 9:30 PM IST · Arturo Romero (Support Application Engineer, Siemens EDA) and Eric Mace (EDM Regional Support Manager, Siemens EDA)

Xpedition Standard Product Overview

Siemens EDA's 60-minute Xpedition Standard overview: the full design flow, AI-driven automation, integrated verification, and shared add-on tokens for advanced capabilities on demand.

Online, free live webinar, 10:30 PM IST · David Haboud (Senior Audience Marketing Manager, Siemens EDA)

GSAS at electronica India 2026

GSAS at electronica India 2026, BIEC Bengaluru, Stall H3.I45: two launches and live demos across the GSAS partner portfolio.

BIEC (Bangalore International Exhibition Centre), Bengaluru · GSAS Application Engineering & Sales Team

Safety of AI-Based Tools: Theory and Practical Experiences

Perforce and Validas AG on safe deployment of AI-based development tools: tool classification and qualification, AI-assisted remediation on Perforce Static Analysis, and formal methods for AI-generated changes.

Online, free live webinar (two regional broadcasts) · Steve Howard (Director of Product, Perforce Software) and Dr. Oscar Slotosch (CEO, Validas AG)

CadenceCONNECT SDA User Conference India 2026

Cadence's free two-day Bengaluru user conference across the SDA portfolio (MSC Software, BETA CAE Systems, Fidelity CFD), with keynotes led by former ISRO Chairman Dr S Somanath and seven technical tracks.

Hilton Bengaluru Embassy Manyata Business Park, Nagawara, Bengaluru · Keynotes per the official Cadence agenda: Dr S Somanath (former ISRO Chairman), with speakers from Skyroot Aerospace, Airbus India, GE Aerospace India, Mercedes-Benz R&D India, Mahindra Last Mile Mobility, Maruti Suzuki India, DRDO and Cadence SDA leadership

Siemens EDA: EDX Essentials with Xpedition EDM

Siemens EDA's EBS Expert Series covers EDX file export and import within EDM Design Cockpit, part of the Xpedition EDM ecosystem.

Online, free live webinar, 9:30 PM IST · Ricardo Valenzuela Acharte (Support Application Engineer, Siemens EDA) and Julio Ayon (Support Application Engineer, Siemens EDA)

Siemens EDA: Net Shorting with Starpoints and Tiebars

Siemens EDA's Expert Series webinar on intentional net shorting with legacy methods, Starpoints, and Tiebars in Xpedition, shared by GSAS for Indian PCB design teams.

Online, free live webinar, 9:30 PM IST · Will Crawford (Support Application Engineer, Siemens EDA) and Jeff Kuester (Support Application Engineer, Siemens EDA)

Siemens EDA: EDM and HyperLynx Best Practices

Siemens EDA's Expert Series webinar on managing HyperLynx analysis and verification data with Xpedition EDM.

Online, free live webinar, 9:30 PM IST · Rory Riggs (Technical Marketing Engineer, Siemens EDA) and Mahmoud El-Ahmady (Support Application Engineer, Siemens EDA)

Elsyca LeakageMaster: Less Iteration, More Confidence

A 45 minute Elsyca webinar on the newest LeakageMaster capabilities: virtual leakage area, plug generation with geometry intersection detection, and post-processing for leak path tracking.

Online, free live webinar on Microsoft Teams, 7:30 PM IST · Romain Baudson (Director Product Operations, Elsyca) and Kinga Bodo (CAE Engineer, Elsyca)

Siemens EDA: Connecting ECAD and PLM with Xpedition EDM

Siemens EDA's Expert Series session on connecting ECAD and PLM through Xpedition EDM, covering library sync, design integration, and digital-thread traceability.

Online, free live webinar, 9:30 PM IST · Andre Mosley (Market Development, Siemens EDA), Eric Mace (EDM Regional Support Manager, Siemens EDA) and Scott Claes (Technical Marketing Engineer, Siemens EDA)

CMSIS Unlocked: Building Smarter and Portable Embedded Systems with Microchip

A 30 minute Arm workshop on CMSIS components, the CMSIS Solution GUI, MPLAB extensions and the CMSIS-Driver DVRT pack, worked through on a Microchip PIC32CM-PL10 Curiosity Nano board.

Online, hosted on Arm Developer · Christopher Seidl (Arm) and Glen Nilsen (Microchip Technology)

Siemens EDA: Verification Rule Checker in the Modern UX

Siemens EDA's Expert Series webinar on setting up a default Verify DRC ruleset in Xpedition's Modern UX, shared by GSAS for Indian PCB design teams.

Online, free live webinar, 9:30 PM IST · Shannon Carrier (Support Application Engineer, Siemens EDA) and Rob Morrow (Support Application Engineer, Siemens EDA)

Beyond Static Analysis: Turning Detection into Immediate Remediation with AI

Online, free live webinar (EMEA session) · Gil Riddall (Product Manager, Perforce Static Analysis)

Siemens EDA: Validating DC Power Delivery with HyperLynx PI

Siemens EDA's Expert Series session on the updated HyperLynx PI workflow for DC Drop analysis across large, high-PDN-count PCB designs.

Online, free live webinar, 9:30 PM IST · Zach Caprai (Technical Marketing Engineer, Siemens EDA) and Kirk Fabbri (Technical Marketing Manager, Simulation and Verification, Siemens EDA)

Integrating ModelNova Fusion Studio with Arm Keil MDK

Online, free live webinar · Arm Keil MDK product team

Siemens EDA PCB Systems Forum 2026

Siemens EDA's in-person Bengaluru forum on AI-driven PCB and IC package design, shift-left reliability, and DFx with Xpedition, HyperLynx, and Valor.

Hotel Radisson Blu, Marathalli ORR, Bengaluru · Siemens EDA PCB & IC packaging technologists

User2User Hardware-Assisted Verification Forum 2026

Siemens EDA's day-long hardware-assisted verification forum in Bengaluru, covering emulation, prototyping, and DFT acceleration on Veloce, with keynotes from Siemens EDA, Nvidia, and Marvell engineering leaders.

Hotel Radisson Blu, Marathalli ORR, Bengaluru · Ruchir Dixit (Siemens EDA) · Ramanan Sanjeevi Krishnan (Nvidia) · Gaurav Jalan (Marvell) · Vijay Chobisa & Pirzad Motafram (Siemens EDA)

SuperGuard: Comprehensive Testing for C++ Multi-Threading Primitives

A Solid Sands webinar introducing SuperGuard and its new testing for C++ multi-threading primitives, with MISRA C++:2023 alignment and workflow integration.

Solid Sands

Fixing the Foundation First: Continuous Confidence in Robotics Software Infrastructure

A Solid Sands webinar on why continuous toolchain validation is becoming a critical safety practice for fast-evolving robotics software.

Solid Sands

DevOps with Arm Keil MDK

Online, free live webinar · Arm Keil MDK product team

Cadence: Using AI/ML to Speed Up Your NVH Simulations: Accelerating Noise, Vibration & Harshness Analysis with Reduced Order Modelling

Online, free live webinar, 15:00 IST · Vivek V (Global Business Development) and Sayma Yasin (Global Business Development)

A State of the Field Report on Rust Guidelines and Standards

Online, free live webinar (two regional broadcasts) · Alex Celeste (Principal Software Engineer, Perforce Software)

What's the State of Automotive Software Development in 2026?

Online, free live webinar (two regional broadcasts) · Jill Britton (Director of Compliance, Perforce) and Gerhard Krüger (Senior Director of Sales Engineering, Perforce ALM)

GSAS at DEF-TECH Bharat Bengaluru 2026

KTPO Whitefield, Bengaluru, Hall 2, Booth D27 · GSAS Application Engineering & Sales Team · Featured partner: Shripathi V

What's New in Arm Keil MDK

Online, free live webinar · Arm Keil MDK product team

PicoScope Masterclass: Automotive Protocol Analysis & Power Electronics Debugging

Full-day PicoScope training on automotive protocol decode, power-electronics debugging, and Python SDK test automation.

GSAS T&M Integration Team

Analyzing Edge AI Applications with Arm's CMSIS Debugger for VS Code

Embedded Online Conference 2026, online conference (paid pass) · Matthias Hertel (Arm, embedded systems, AI, and IoT for Cortex-M developers)

Q2 Static Analysis Sync: Perforce Klocwork & Perforce QAC 2026.1

Online, free live webinar · Gil Riddall (Product Manager, Perforce Static Analysis) · Colin Bigg (Product Owner, Perforce Static Analysis)

Hands-On Workshop: Automated Unit Testing with TESSY for ISO 26262

Hands-on Razorcat TESSY workshop: automated unit testing, Classification Tree Method, MC/DC coverage, and ISO 26262 audit-ready reports.

GSAS Engineering Services

EU Cyber Resilience Act: Preparing Your Embedded Product for 2027 Compliance

Preparing an embedded product for EU Cyber Resilience Act 2027 compliance: SBOM, vulnerability management, and a CRA-ready toolchain.

GSAS Compliance Team

Webinar: Shift-Left Testing: From Unit Tests to Virtual ECU Validation

Shift-left testing for automotive software: static analysis, virtual ECU validation, and CI/CD integration to catch defects earlier.

GSAS Engineering Services

Workshop: Getting Started with Saleae Logic Pro 16 & Python Automation

Hands-on Saleae Logic Pro 16 workshop: protocol decoders, custom analyzers, and Python/gRPC automation for CI/CD test.

GSAS T&M Integration Team